Problem with bench command

syd_sozo · August 7, 2014, 3:05pm

Hi developer I really ned your help

I am trying to isntall ERPNext with the help of https://github.com/frappe/bench

I installed following the isntructions:

wget https://raw.githubusercontent.com/frappe/bench/master/install_scripts/setup_frappe.sh
sudo bash setup_frappe.sh

Everything finish normal but when I go to cd ~ and execute the comand 'bench' ,that command doesnt exists

PLease help me to fix this ,I am following the instructions of that link to install ERPNext

Thank you so much

–

Note:

If you are posting an issue,

ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

—

You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/619f67cb-f457-4291-a8ef-b0648c4a04bb%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

pdvyas · August 8, 2014, 5:52am

On Thu, Aug 7, 2014 at 8:35 PM, Luis Rodriguez sy...@gmail.com wrote:

Hi developer I really ned your help

I am trying to isntall ERPNext with the help of
GitHub - frappe/bench: CLI to manage Multi-tenant deployments for Frappe apps
I installed following the isntructions:

wget
https://raw.githubusercontent.com/frappe/bench/master/install_scripts/setup_frappe.sh
sudo bash setup_frappe.sh

Everything finish normal but when I go to cd ~ and execute the comand
‘bench’ ,that command doesnt exists

PLease help me to fix this ,I am following the instructions of that link to
install ERPNext

Hi Luis,

Which distribution (Ubuntu, Debian, CentOS) are you on?

This will really help as I am not able to replicate the script
failures on my test machine.

Thanks,

Pratik
erpnext

subhra44 · August 8, 2014, 11:13am

Having the same problem. I am using Centos 5.

On Friday, 8 August 2014 11:22:56 UTC+5:30, Pratik Vyas wrote:

On Thu, Aug 7, 2014 at 8:35 PM, Luis Rodriguez <sy...@gmail.com> wrote:
> Hi developer I really ned your help
>
> I am trying to isntall ERPNext with the help of
> https://github.com/frappe/bench
> I installed following the isntructions:
>
> wget
> https://raw.githubusercontent.com/frappe/bench/master/install_scripts/setup_frappe.sh
> sudo bash setup_frappe.sh
>
>
> Everything finish normal but when I go to cd ~ and execute the comand
> 'bench' ,that command doesnt exists
>
> PLease help me to fix this ,I am following the instructions of that link to
> install ERPNext
>

Hi Luis,

Which distribution (Ubuntu, Debian, CentOS) are you on?

This will really help as I am not able to replicate the script
failures on my test machine.

Thanks,
--
Pratik
erpnext

–

Note:

If you are posting an issue,

ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

—

You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/e5fe87cb-bbe3-40e5-89f6-9932bc6abbe6%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

pdvyas · August 8, 2014, 11:29am

On Fri, Aug 8, 2014 at 4:43 PM, Subhra Jyoti Bhuyan su...@gmail.com wrote:

Having the same problem. I am using Centos 5.

The script doesn’t support CentOS 5. We plan to add support for CentOS 7 soon.

Thanks,

Pratik
erpnext

subhra44 · August 8, 2014, 11:33am

Is there any other option to install the same in CentOs 5?

On Friday, 8 August 2014 16:59:04 UTC+5:30, Pratik Vyas wrote:

On Fri, Aug 8, 2014 at 4:43 PM, Subhra Jyoti Bhuyan <su...@gmail.com> wrote:
> Having the same problem. I am using Centos 5.
>

The script doesn't support CentOS 5. We plan to add support for CentOS 7 soon.

Thanks,
--
Pratik
erpnext

–

Note:

If you are posting an issue,

ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

—

You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/68b003e1-33ff-42d1-a077-79cacd9ea9d9%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

subhra44 · August 8, 2014, 11:34am

I mean ERPNEXT.

On Friday, 8 August 2014 17:03:29 UTC+5:30, Subhra Jyoti Bhuyan wrote:

Is there any other option to install the same in CentOs 5?

On Friday, 8 August 2014 16:59:04 UTC+5:30, Pratik Vyas wrote:
On Fri, Aug 8, 2014 at 4:43 PM, Subhra Jyoti Bhuyan <su…@gmail.com> wrote:

> Having the same problem. I am using Centos 5.

>

The script doesn’t support CentOS 5. We plan to add support for CentOS 7 soon.

Thanks,

–

Pratik

erpnext

–

Note:

If you are posting an issue,

ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

—

You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/a27062d0-56ac-4005-8ea6-bfee2d5a748a%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

anand · August 8, 2014, 11:36am

It is going to be a pain and might not be worth the effort.

In general, the steps could be:

1. You will need to compile python 2.7 and latest nginx

2. Install dependencies

3. Install using these steps: https://github.com/frappe/bench#manual-install

-Anand.

On Fri, Aug 8, 2014 at 5:04 PM, Subhra Jyoti Bhuyan <su…@gmail.com> wrote:

I mean ERPNEXT.

On Friday, 8 August 2014 17:03:29 UTC+5:30, Subhra Jyoti Bhuyan wrote:

Is there any other option to install the same in CentOs 5?

On Friday, 8 August 2014 16:59:04 UTC+5:30, Pratik Vyas wrote:

On Fri, Aug 8, 2014 at 4:43 PM, Subhra Jyoti Bhuyan <su…@gmail.com> wrote:

> Having the same problem. I am using Centos 5.

>

The script doesn't support CentOS 5. We plan to add support for CentOS 7 soon.

Thanks,

–

Pratik

erpnext

–

Note:

If you are posting an issue,

ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

—

You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/a27062d0-56ac-4005-8ea6-bfee2d5a748a%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

–

Note:

If you are posting an issue,

ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

—

You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAAQzbF2iDSCnZ4aqPiqTzMef2gMXk3rnbmV8q4dsQjcysP721g%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

pdvyas · August 8, 2014, 11:40am

On Fri, Aug 8, 2014 at 5:06 PM, Anand Doshi an...@erpnext.com wrote:

It is going to be a pain and might not be worth the effort.

In general, the steps could be:

You will need to compile python 2.7 and latest nginx

Install dependencies

Install using these steps: GitHub - frappe/bench: CLI to manage Multi-tenant deployments for Frappe apps

Yes, follow the manual-install instructions. Python2.7 is available in
IUS community repo and a more recent version of nginx is available
from EPEL repo (or you can use the official repos from nginx).

Thanks,
Pratik

subhra44 · August 8, 2014, 11:54am

That means it is not supported in Apache? And what about MySQL?

On Friday, 8 August 2014 17:10:09 UTC+5:30, Pratik Vyas wrote:

On Fri, Aug 8, 2014 at 5:06 PM, Anand Doshi <an...@erpnext.com> wrote:
> It is going to be a pain and might not be worth the effort.
>
> In general, the steps could be:
> 1. You will need to compile python 2.7 and latest nginx
> 2. Install dependencies
> 3. Install using these steps: https://github.com/frappe/bench#manual-install
>

Yes, follow the manual-install instructions. Python2.7 is available in
IUS community repo and a more recent version of nginx is available
from EPEL repo (or you can use the official repos from nginx).

Thanks,
Pratik

–

Note:

If you are posting an issue,

ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

—

You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/bc906da8-a8ed-4af4-a2cf-59ea5f498c5a%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

anand · August 8, 2014, 11:55am

body { font-family: "Helvetica Neue", Helvetica, Arial, sans-serif; padding:1em; margin:auto; background:#fefefe; }

h1, h2, h3, h4, h5, h6 {
font-weight: bold;
}

h1 {
color: #000000;
font-size: 28pt;
}

h2 {
border-bottom: 1px solid #CCCCCC;
color: #000000;
font-size: 24px;
}

h3 {
font-size: 18px;
}

h4 {
font-size: 16px;
}

h5 {
font-size: 14px;
}

h6 {
color: #777777;
background-color: inherit;
font-size: 14px;
}

hr {
height: 0.2em;
border: 0;
color: #CCCCCC;
background-color: #CCCCCC;
}

p, blockquote, ul, ol, dl, li, table, pre {
margin: 15px 0;
}

a, a:visited {
color: #4183C4;
background-color: inherit;
text-decoration: none;
}

#message {
border-radius: 6px;
border: 1px solid #ccc;
display:block;
width:100%;
height:60px;
margin:6px 0px;
}

button, #ws {
font-size: 12 pt;
padding: 4px 6px;
border-radius: 5px;
border: 1px solid #bbb;
background-color: #eee;
}

code, pre, #ws, #message {
font-family: Monaco;
font-size: 10pt;
border-radius: 3px;
background-color: #F8F8F8;
color: inherit;
}

code {
border: 1px solid #EAEAEA;
margin: 0 2px;
padding: 0 5px;
}

pre {
border: 1px solid #CCCCCC;
overflow: auto;
padding: 4px 8px;
}

pre > code {
border: 0;
margin: 0;
padding: 0;
}

#ws { background-color: #f8f8f8; }

.bloop_markdown table {
border-collapse: collapse;
font-family: Helvetica, arial, freesans, clean, sans-serif;
color: rgb(51, 51, 51);
font-size: 15px; line-height: 25px;
padding: 0; }

.bloop_markdown table tr {
border-top: 1px solid #cccccc;
background-color: white;
margin: 0;
padding: 0; }

.bloop_markdown table tr:nth-child(2n) {
background-color: #f8f8f8; }

.bloop_markdown table tr th {
font-weight: bold;
border: 1px solid #cccccc;
margin: 0;
padding: 6px 13px; }

.bloop_markdown table tr td {
border: 1px solid #cccccc;
margin: 0;
padding: 6px 13px; }

.bloop_markdown table tr th :first-child, table tr td :first-child {
margin-top: 0; }

.bloop_markdown table tr th :last-child, table tr td :last-child {
margin-bottom: 0; }

.bloop_markdown blockquote{
border-left: 4px solid #dddddd;
padding: 0 15px;
color: #777777; }
blockquote > :first-child {
margin-top: 0; }
blockquote > :last-child {
margin-bottom: 0; }

.send { color:#77bb77; }
.server { color:#7799bb; }
.error { color:#AA0000; }

MariaDB is required, since we need microsecond precision.

body{font-family:Helvetica,Arial;font-size:13px}

Thanks,

Anand Doshi.

On 8 August 2014 at 5:24:06 pm, Subhra Jyoti Bhuyan (su...@gmail.com) wrote:

That means it is not supported in Apache? And what about MySQL?

On Friday, 8 August 2014 17:10:09 UTC+5:30, Pratik Vyas wrote:
On Fri, Aug 8, 2014 at 5:06 PM, Anand Doshi <an...@erpnext.com> wrote:
> It is going to be a pain and might not be worth the effort.
>
> In general, the steps could be:
> 1. You will need to compile python 2.7 and latest nginx
> 2. Install dependencies
> 3. Install using these steps: https://github.com/frappe/bench#manual-install
>

Yes, follow the manual-install instructions. Python2.7 is available in
IUS community repo and a more recent version of nginx is available
from EPEL repo (or you can use the official repos from nginx).

Thanks,
Pratik

--
Note:

If you are posting an issue,

1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/bc906da8-a8ed-4af4-a2cf-59ea5f498c5a%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

–

Note:

If you are posting an issue,

ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

—

You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/etPan.53e4bab3.6b8b4567.819f%40apdmacbook.local.

For more options, visit https://groups.google.com/d/optout.

subhra44 · August 8, 2014, 12:02pm

What about Apache?

Regarding MySQL, following line is mentioned in github page (https://github.com/frappe/erpnext) (README.md section)

Includes Accounting, Inventory, CRM, Sales, Purchase, Projects, HRMS. Built on Python / MySQL.

What does it mean?

On Friday, 8 August 2014 17:25:38 UTC+5:30, Anand Doshi wrote:

MariaDB is required, since we need microsecond precision.

Thanks,
Anand Doshi.

On 8 August 2014 at 5:24:06 pm, Subhra Jyoti Bhuyan (su...@gmail.com) wrote:

That means it is not supported in Apache? And what about MySQL?

On Friday, 8 August 2014 17:10:09 UTC+5:30, Pratik Vyas wrote:
On Fri, Aug 8, 2014 at 5:06 PM, Anand Doshi <an...@erpnext.com> wrote:
> It is going to be a pain and might not be worth the effort.
>
> In general, the steps could be:
> 1. You will need to compile python 2.7 and latest nginx
> 2. Install dependencies
> 3. Install using these steps: https://github.com/frappe/bench#manual-install
>

Yes, follow the manual-install instructions. Python2.7 is available in
IUS community repo and a more recent version of nginx is available
from EPEL repo (or you can use the official repos from nginx).

Thanks,
Pratik

--
Note:

If you are posting an issue,

1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/bc906da8-a8ed-4af4-a2cf-59ea5f498c5a%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

–

Note:

If you are posting an issue,

ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

—

You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/9093a78e-0ece-446c-abd7-6a91778eeaeb%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

anand · August 8, 2014, 12:05pm