Installation on OSX

Hi,

I had posted this query on the user forum but didnt get a reply for the last 2 days.

Hoping to get some help here.

I want to install / run ERPNext on my local network keeping my macbook as the host for it. Where can I find the step by step process for this? the Userguide does not seem to have such details.

Also, tried using GitHub for it, but the production deployment only gives two commands. I'm sure I'm missing something here...can anybody enlighten me?

Regards
Aditya



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/16111c3f-3916-47e3-a2f7-ef7628344219%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.
https://github.com/frappe/frappe-bench

For Mac OS, instead of apt-get you will have to use a package manager like brew


On 19-May-2014, at 9:23 pm, ad...@brandpack.in wrote:

Hi,

I had posted this query on the user forum but didnt get a reply for the last 2 days.

Hoping to get some help here.

I want to install / run ERPNext on my local network keeping my macbook as the host for it. Where can I find the step by step process for this? the Userguide does not seem to have such details.

Also, tried using GitHub for it, but the production deployment only gives two commands. I'm sure I'm missing something here...can anybody enlighten me?

Regards
Aditya



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/16111c3f-3916-47e3-a2f7-ef7628344219%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/F6AB70DC-07FC-4ED8-A039-EEC720CFCD81%40gmail.com.

    For more options, visit https://groups.google.com/d/optout.
Thanks for the quick response Rushabh! It seems I was posting on the wrong forum indeed.

I had checked the link you shared about GitHub, but couldnt follow much, do you have a step by step guide on this?

Is it the same if my webhosting provider will install it on the space I have taken from him. I was asked to check if cpanel is required. I've been paying for about 5 GB space all these years and havent hosted anything but a single page website so he suggested i check if we could utilize that.


On Mon, May 19, 2014 at 9:26 PM, Rushabh Mehta <rm...@gmail.com> wrote:
https://github.com/frappe/frappe-bench

For Mac OS, instead of apt-get you will have to use a package manager like brew


On 19-May-2014, at 9:23 pm, ad...@brandpack.in wrote:

Hi,

I had posted this query on the user forum but didnt get a reply for the last 2 days.

Hoping to get some help here.

I want to install / run ERPNext on my local network keeping my macbook as the host for it. Where can I find the step by step process for this? the Userguide does not seem to have such details.

Also, tried using GitHub for it, but the production deployment only gives two commands. I'm sure I'm missing something here...can anybody enlighten me?

Regards
Aditya



Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.



Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to a topic in the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this topic, visit https://groups.google.com/d/topic/erpnext-developer-forum/5PB06tNJVL8/unsubscribe.

To unsubscribe from this group and all its topics, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/F6AB70DC-07FC-4ED8-A039-EEC720CFCD81%40gmail.com.


For more options, visit https://groups.google.com/d/optout.



--

Regards
Aditya



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CABnOH14HxePBchQMVt_sZj%3D2eSEuAeQPU_f%2B0VhwwtFtu4iKCQ%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.

On 19-May-2014, at 9:37 pm, Aditya Bagarka <ad...@brandpack.in> wrote:

Thanks for the quick response Rushabh! It seems I was posting on the wrong forum indeed.

I had checked the link you shared about GitHub, but couldnt follow much, do you have a step by step guide on this?

This is pretty much it, you will have to install XCode, homebrew and then install the pre-requisites. You will need to learn basic Unix command line  (Terminal) for this. You can google that part up, its not very hard but will take sometime.

Is it the same if my webhosting provider will install it on the space I have taken from him. I was asked to check if cpanel is required. I've been paying for about 5 GB space all these years and havent hosted anything but a single page website so he suggested i check if we could utilize that.

You will need at minimum Virtual Machine, because you need shell access to install and run ERPNext. Buying webspace usually does not cut it.



On Mon, May 19, 2014 at 9:26 PM, Rushabh Mehta <rm...@gmail.com> wrote:
https://github.com/frappe/frappe-bench

For Mac OS, instead of apt-get you will have to use a package manager like brew


On 19-May-2014, at 9:23 pm, ad...@brandpack.in wrote:

Hi,

I had posted this query on the user forum but didnt get a reply for the last 2 days.

Hoping to get some help here.

I want to install / run ERPNext on my local network keeping my macbook as the host for it. Where can I find the step by step process for this? the Userguide does not seem to have such details.

Also, tried using GitHub for it, but the production deployment only gives two commands. I'm sure I'm missing something here...can anybody enlighten me?

Regards
Aditya



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to a topic in the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this topic, visit https://groups.google.com/d/topic/erpnext-developer-forum/5PB06tNJVL8/unsubscribe.

To unsubscribe from this group and all its topics, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/F6AB70DC-07FC-4ED8-A039-EEC720CFCD81%40gmail.com.


For more options, visit https://groups.google.com/d/optout.



--

Regards
Aditya



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CABnOH14HxePBchQMVt_sZj%3D2eSEuAeQPU_f%2B0VhwwtFtu4iKCQ%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/12F2A047-6E0E-4964-AB42-2B0FB366AF02%40gmail.com.

    For more options, visit https://groups.google.com/d/optout.

On Mon, May 19, 2014 at 9:37 PM, Aditya Bagarka ad...@brandpack.in wrote:

Thanks for the quick response Rushabh! It seems I was posting on the wrong
forum indeed.

Yes, it has been answered before :slight_smile:
https://groups.google.com/forum/#!msg/erpnext-developer-forum/fzwhV5bTX2c/vDq5WHtPtu4J

I had checked the link you shared about GitHub, but couldnt follow much, do
you have a step by step guide on this?

On Debian/Ubuntu running the commands in the bench readme should get
erpnext running.

Is it the same if my webhosting provider will install it on the space I have
taken from him. I was asked to check if cpanel is required. I’ve been paying
for about 5 GB space all these years and havent hosted anything but a single
page website so he suggested i check if we could utilize that.

Avoid CPanel based stuff and shared hosting, it really comes in the
way. Ideally, you’d want a VPS if you want to host it on the internet.

Thanks,

Pratik
erpnext

After I run command “bench init frappe-bench && cd frappe-bench” … I get this error…

/Users/vipulvaibhaw/Documents/frappe/frappe-bench/env/bin/python: dlopen(/Users/vipulvaibhaw/Documents/frappe/frappe-bench/env/lib/python2.7/site-packages/_mysql.so, 2): Library not loaded: /usr/local/lib/libmysqlclient.18.dylib
Referenced from: /Users/vipulvaibhaw/Documents/frappe/frappe-bench/env/lib/python2.7/site-packages/_mysql.so
Reason: image not found
Traceback (most recent call last):
File “/usr/local/bin/bench”, line 9, in
load_entry_point(‘bench’, ‘console_scripts’, ‘bench’)()
File “/Users/vipulvaibhaw/Documents/frappe/bench-repo/bench/cli.py”, line 40, in cli
bench_command()
File “/Library/Python/2.7/site-packages/click/core.py”, line 716, in call
return self.main(*args, **kwargs)
File “/Library/Python/2.7/site-packages/click/core.py”, line 696, in main
rv = self.invoke(ctx)
File “/Library/Python/2.7/site-packages/click/core.py”, line 1060, in invoke
return _process_result(sub_ctx.command.invoke(sub_ctx))
File “/Library/Python/2.7/site-packages/click/core.py”, line 889, in invoke
return ctx.invoke(self.callback, **ctx.params)
File “/Library/Python/2.7/site-packages/click/core.py”, line 534, in invoke
return callback(*args, **kwargs)
File “/Users/vipulvaibhaw/Documents/frappe/bench-repo/bench/commands/make.py”, line 19, in init
verbose=verbose, clone_from=clone_from)
File “/Users/vipulvaibhaw/Documents/frappe/bench-repo/bench/utils.py”, line 67, in init
build_assets(bench_path=path)
File “/Users/vipulvaibhaw/Documents/frappe/bench-repo/bench/utils.py”, line 174, in build_assets
run_frappe_cmd(‘build’, bench_path=bench_path)
File “/Users/vipulvaibhaw/Documents/frappe/bench-repo/bench/utils.py”, line 504, in run_frappe_cmd
raise CommandFailedError(args)
bench.utils.CommandFailedError: (‘build’,)

how to resolve this?