Error migrating site

I am following the migrating guide.

When I run "bench migrate-3to4 /path/to/old/erpnext/folder" (of course I replace with my correct path)
I have this error "subprocess.CalledProcessError: Command 'env/bin/python /opt/erpnext/bench-repo/bench/migrate3to4.py /opt/erpnext' returned non-zero exit status 127

What should I do?



Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/533e4080-d507-4da0-a528-87bdc38afcb7%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.

On Thu, Jul 31, 2014 at 2:00 PM, CJ jo...@gmail.com wrote:

I am following the migrating guide.

When I run “bench migrate-3to4 /path/to/old/erpnext/folder” (of course I
replace with my correct path)
I have this error "subprocess.CalledProcessError: Command ‘env/bin/python
/opt/erpnext/bench-repo/bench/migrate3to4.py /opt/erpnext’ returned non-zero
exit status 127

What is the rest of the error? Must have printed above this.

What should I do?


Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this
    forum by a team (https://frappe.io/webnotes). So please consider donating if
    you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send
    only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/533e4080-d507-4da0-a528-87bdc38afcb7%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Pratik
erpnext

I capture the screen here -> https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xap1/t1.0-9/10590412_10201584869823787_122655836975936751_n.jpg

On Thursday, 31 July 2014 16:56:08 UTC+8, Pratik Vyas wrote:

On Thu, Jul 31, 2014 at 2:00 PM, CJ <jo…@gmail.com> wrote:

> I am following the migrating guide.

>

> When I run “bench migrate-3to4 /path/to/old/erpnext/folder” (of course I

> replace with my correct path)

> I have this error "subprocess.CalledProcessError: Command ‘env/bin/python

> /opt/erpnext/bench-repo/bench/migrate3to4.py /opt/erpnext’ returned non-zero

> exit status 127

>

What is the rest of the error? Must have printed above this.

> What should I do?

>

> –

> Note:

>

> If you are posting an issue,

>

> 1. ERPNext is a free and open source software and support is given on this

> forum by a team (https://frappe.io/webnotes). So please consider donating if

> you find this forum useful (https://frappe.io/buy). Even a small amount

> would be helpful.

> 2. We should be able to replicate it at our end. So please give us as much

> information as you can. Please see it from the point of view of the person

> receiving the communication.

> 3. Paste your code at http://pastebin.com or http://gist.github.com and send

> only the URL via email

> 4. For sending images, use http://imgur.com or other similar services. Do

> not send images as attachments. Links are good. Same goes for any file you

> are going to send.

>

> End of Note

> —

> You received this message because you are subscribed to the Google Groups

> “ERPNext Developer Forum” group.

> To unsubscribe from this group and stop receiving emails from it, send an

> email to erpnext-developer-forum+un…@googlegroups.com.

> To view this discussion on the web visit

> https://groups.google.com/d/msgid/erpnext-developer-forum/533e4080-d507-4da0-a528-87bdc38afcb7%40googlegroups.com.

> For more options, visit https://groups.google.com/d/optout.









Pratik

erpnext



Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/f8e17ad1-3eda-49e1-9219-eb28d74b0c8a%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.

On Thu, Jul 31, 2014 at 2:33 PM, CJ jo...@gmail.com wrote:

I capture the screen here ->
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xap1/t1.0-9/10590412_10201584869823787_122655836975936751_n.jpg

The stacktrace I am looking for is above that.

On Thursday, 31 July 2014 16:56:08 UTC+8, Pratik Vyas wrote:

On Thu, Jul 31, 2014 at 2:00 PM, CJ jo...@gmail.com wrote:

I am following the migrating guide.

When I run “bench migrate-3to4 /path/to/old/erpnext/folder” (of course I
replace with my correct path)
I have this error "subprocess.CalledProcessError: Command
‘env/bin/python
/opt/erpnext/bench-repo/bench/migrate3to4.py /opt/erpnext’ returned
non-zero
exit status 127

What is the rest of the error? Must have printed above this.

What should I do?


Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this
    forum by a team (https://frappe.io/webnotes). So please consider
    donating if
    you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much
    information as you can. Please see it from the point of view of the
    person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send
    only the URL via email
  4. For sending images, use http://imgur.com or other similar services.
    Do
    not send images as attachments. Links are good. Same goes for any file
    you
    are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send
an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit

https://groups.google.com/d/msgid/erpnext-developer-forum/533e4080-d507-4da0-a528-87bdc38afcb7%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.


Pratik
erpnext


Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this
    forum by a team (https://frappe.io/webnotes). So please consider donating if
    you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send
    only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/f8e17ad1-3eda-49e1-9219-eb28d74b0c8a%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.


Pratik
erpnext

Traceback (most recent call last):
  File "/opt/erpnext/bench-repo/bench/migrate3to4.py", line 98, in <module>
    main(args.site)
  File "/opt/erpnext/bench-repo/bench/migrate3to4.py", line 37, in main
    site = copy_site(path)
  File "/opt/erpnext/bench-repo/bench/migrate3to4.py", line 47, in copy_site
    raise Exception("Site already exists")
Exception: Site already exists
Error: None
Traceback (most recent call last):
  File "/usr/local/bin/bench", line 9, in <module>
    load_entry_point('bench==0.1', 'console_scripts', 'bench')()
  File "/opt/erpnext/bench-repo/bench/cli.py", line 26, in cli
    return bench()
  File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 488, in __call__
    return self.main(*args, **kwargs)
  File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 474, in main
    self.invoke(ctx)
  File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 758, in invoke
    return self.invoke_subcommand(ctx, cmd, cmd_name, ctx.args[1:])
  File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 767, in invoke_subcommand
    return cmd.invoke(cmd_ctx)
  File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 659, in invoke
    ctx.invoke(self.callback, **ctx.params)
  File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 325, in invoke
    return callback(*args, **kwargs)
  File "/opt/erpnext/bench-repo/bench/cli.py", line 117, in migrate_3to4
    site=path))
  File "/opt/erpnext/bench-repo/bench/utils.py", line 50, in exec_cmd
    subprocess.check_call(cmd, cwd=cwd, shell=True)
  File "/usr/lib/python2.7/subprocess.py", line 511, in check_call
    raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command 'env/bin/python /opt/erpnext/bench-repo/bench/migrate3to4.py /opt/erpnext' returned non-zero exit status 1


On Thursday, 31 July 2014 17:05:18 UTC+8, Pratik Vyas wrote:
On Thu, Jul 31, 2014 at 2:33 PM, CJ <jo...@gmail.com> wrote:
> I capture the screen here ->
> https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-xap1/t1.0-9/10590412_10201584869823787_122655836975936751_n.jpg
>

The stacktrace I am looking for is above that.

> On Thursday, 31 July 2014 16:56:08 UTC+8, Pratik Vyas wrote:
>>
>> On Thu, Jul 31, 2014 at 2:00 PM, CJ <jo...@gmail.com> wrote:
>> > I am following the migrating guide.
>> >
>> > When I run "bench migrate-3to4 /path/to/old/erpnext/folder" (of course I
>> > replace with my correct path)
>> > I have this error "subprocess.CalledProcessError: Command
>> > 'env/bin/python
>> > /opt/erpnext/bench-repo/bench/migrate3to4.py /opt/erpnext' returned
>> > non-zero
>> > exit status 127
>> >
>> What is the rest of the error? Must have printed above this.
>> > What should I do?
>> >
>> > --
>> > Note:
>> >
>> > If you are posting an issue,
>> >
>> > 1. ERPNext is a free and open source software and support is given on
>> > this
>> > forum by a team (https://frappe.io/webnotes). So please consider
>> > donating if
>> > you find this forum useful (https://frappe.io/buy). Even a small amount
>> > would be helpful.
>> > 2. We should be able to replicate it at our end. So please give us as
>> > much
>> > information as you can. Please see it from the point of view of the
>> > person
>> > receiving the communication.
>> > 3. Paste your code at http://pastebin.com or http://gist.github.com and
>> > send
>> > only the URL via email
>> > 4. For sending images, use http://imgur.com or other similar services.
>> > Do
>> > not send images as attachments. Links are good. Same goes for any file
>> > you
>> > are going to send.
>> >
>> > End of Note
>> > ---
>> > You received this message because you are subscribed to the Google
>> > Groups
>> > "ERPNext Developer Forum" group.
>> > To unsubscribe from this group and stop receiving emails from it, send
>> > an
>> > email to erpnext-developer-forum+un...@googlegroups.com.
>> > To view this discussion on the web visit
>> >
>> > https://groups.google.com/d/msgid/erpnext-developer-forum/533e4080-d507-4da0-a528-87bdc38afcb7%40googlegroups.com.
>> > For more options, visit https://groups.google.com/d/optout.
>>
>>
>>
>> --
>> Pratik
>> erpnext
>
> --
> Note:
>
> If you are posting an issue,
>
> 1. ERPNext is a free and open source software and support is given on this
> forum by a team (https://frappe.io/webnotes). So please consider donating if
> you find this forum useful (https://frappe.io/buy). Even a small amount
> would be helpful.
> 2. We should be able to replicate it at our end. So please give us as much
> information as you can. Please see it from the point of view of the person
> receiving the communication.
> 3. Paste your code at http://pastebin.com or http://gist.github.com and send
> only the URL via email
> 4. For sending images, use http://imgur.com or other similar services. Do
> not send images as attachments. Links are good. Same goes for any file you
> are going to send.
>
> End of Note
> ---
> You received this message because you are subscribed to the Google Groups
> "ERPNext Developer Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to erpnext-developer-forum+un...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/erpnext-developer-forum/f8e17ad1-3eda-49e1-9219-eb28d74b0c8a%40googlegroups.com.
>
> For more options, visit https://groups.google.com/d/optout.



--
Pratik
erpnext



Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/17b753a8-204d-4c96-bb9d-b11ef988fdfb%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.

On Thu, Jul 31, 2014 at 3:02 PM, CJ jo...@gmail.com wrote:

Traceback (most recent call last):
File “/opt/erpnext/bench-repo/bench/migrate3to4.py”, line 98, in
main(args.site)
File “/opt/erpnext/bench-repo/bench/migrate3to4.py”, line 37, in main
site = copy_site(path)
File “/opt/erpnext/bench-repo/bench/migrate3to4.py”, line 47, in copy_site
raise Exception(“Site already exists”)
Exception: Site already exists
Error: None
Traceback (most recent call last):
File “/usr/local/bin/bench”, line 9, in
load_entry_point(‘bench==0.1’, ‘console_scripts’, ‘bench’)()
File “/opt/erpnext/bench-repo/bench/cli.py”, line 26, in cli
return bench()
File “/usr/local/lib/python2.7/dist-packages/click/core.py”, line 488, in
call
return self.main(*args, **kwargs)
File “/usr/local/lib/python2.7/dist-packages/click/core.py”, line 474, in
main
self.invoke(ctx)
File “/usr/local/lib/python2.7/dist-packages/click/core.py”, line 758, in
invoke
return self.invoke_subcommand(ctx, cmd, cmd_name, ctx.args[1:])
File “/usr/local/lib/python2.7/dist-packages/click/core.py”, line 767, in
invoke_subcommand
return cmd.invoke(cmd_ctx)
File “/usr/local/lib/python2.7/dist-packages/click/core.py”, line 659, in
invoke
ctx.invoke(self.callback, **ctx.params)
File “/usr/local/lib/python2.7/dist-packages/click/core.py”, line 325, in
invoke
return callback(*args, **kwargs)
File “/opt/erpnext/bench-repo/bench/cli.py”, line 117, in migrate_3to4
site=path))
File “/opt/erpnext/bench-repo/bench/utils.py”, line 50, in exec_cmd
subprocess.check_call(cmd, cwd=cwd, shell=True)
File “/usr/lib/python2.7/subprocess.py”, line 511, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command ‘env/bin/python
/opt/erpnext/bench-repo/bench/migrate3to4.py /opt/erpnext’ returned non-zero
exit status 1

I assume that the site was copied. Still, to be on the safe side run
the following, If any error occours please post complete output and
traceback.

Run,

bench update --pull
mv sites/erpnext /tmp/old_erpnext
bench migrate-3to4 /opt/erpnext

from the new bench

Thanks,

Pratik
erpnext

Hi I did the 3 commands, and I still get the exact error.

On Thursday, 31 July 2014 17:39:38 UTC+8, Pratik Vyas wrote:
On Thu, Jul 31, 2014 at 3:02 PM, CJ <jo...@gmail.com> wrote:
> Traceback (most recent call last):
>   File "/opt/erpnext/bench-repo/bench/migrate3to4.py", line 98, in <module>
>     main(args.site)
>   File "/opt/erpnext/bench-repo/bench/migrate3to4.py", line 37, in main
>     site = copy_site(path)
>   File "/opt/erpnext/bench-repo/bench/migrate3to4.py", line 47, in copy_site
>     raise Exception("Site already exists")
> Exception: Site already exists
> Error: None
> Traceback (most recent call last):
>   File "/usr/local/bin/bench", line 9, in <module>
>     load_entry_point('bench==0.1', 'console_scripts', 'bench')()
>   File "/opt/erpnext/bench-repo/bench/cli.py", line 26, in cli
>     return bench()
>   File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 488, in
> __call__
>     return self.main(*args, **kwargs)
>   File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 474, in
> main
>     self.invoke(ctx)
>   File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 758, in
> invoke
>     return self.invoke_subcommand(ctx, cmd, cmd_name, ctx.args[1:])
>   File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 767, in
> invoke_subcommand
>     return cmd.invoke(cmd_ctx)
>   File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 659, in
> invoke
>     ctx.invoke(self.callback, **ctx.params)
>   File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 325, in
> invoke
>     return callback(*args, **kwargs)
>   File "/opt/erpnext/bench-repo/bench/cli.py", line 117, in migrate_3to4
>     site=path))
>   File "/opt/erpnext/bench-repo/bench/utils.py", line 50, in exec_cmd
>     subprocess.check_call(cmd, cwd=cwd, shell=True)
>   File "/usr/lib/python2.7/subprocess.py", line 511, in check_call
>     raise CalledProcessError(retcode, cmd)
> subprocess.CalledProcessError: Command 'env/bin/python
> /opt/erpnext/bench-repo/bench/migrate3to4.py /opt/erpnext' returned non-zero
> exit status 1
>

I assume that the site was copied. Still, to be on the safe side run
the following, If any error occours please post complete output and
traceback.

Run,

bench update --pull
mv sites/erpnext /tmp/old_erpnext
bench migrate-3to4 /opt/erpnext

from the new bench

Thanks,
--
Pratik
erpnext



Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/dbf1823d-d3fc-43ec-90a1-edafb901c482%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.

On Fri, Aug 1, 2014 at 7:18 AM, CJ jo...@gmail.com wrote:

Hi I did the 3 commands, and I still get the exact error.

Do you mean, “Site already exists”?

Hi, no. I still get the exact same error message the stracetrace message.

On Friday, 1 August 2014 12:21:20 UTC+8, Pratik Vyas wrote:

On Fri, Aug 1, 2014 at 7:18 AM, CJ <jo…@gmail.com> wrote:

> Hi I did the 3 commands, and I still get the exact error.

>



Do you mean, “Site already exists”?



Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/0b50d7fb-a803-4c53-b384-03c5e553e874%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.

On Fri, Aug 1, 2014 at 11:00 AM, CJ jo...@gmail.com wrote:

Hi, no. I still get the exact same error message the stracetrace message.

There will be two traces, one would be called process error (below)
and the other one which we’re interested in will be above.

The trace that you shared had “Site already exists” exception. Is that
what you got?

On Friday, 1 August 2014 12:21:20 UTC+8, Pratik Vyas wrote:

On Fri, Aug 1, 2014 at 7:18 AM, CJ jo...@gmail.com wrote:

Hi I did the 3 commands, and I still get the exact error.

Do you mean, “Site already exists”?


Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this
    forum by a team (https://frappe.io/webnotes). So please consider donating if
    you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send
    only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/0b50d7fb-a803-4c53-b384-03c5e553e874%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

Thanks,

Pratik
erpnext

Yes when I run bench migrate-3to4 /opt/erpnext, i have this:

Traceback (most recent call last):
  File "/opt/erpnext/bench-repo/bench/migrate3to4.py", line 98, in <module>
    main(args.site)
  File "/opt/erpnext/bench-repo/bench/migrate3to4.py", line 37, in main
    site = copy_site(path)
  File "/opt/erpnext/bench-repo/bench/migrate3to4.py", line 47, in copy_site
    raise Exception("Site already exists")
Exception: Site already exists
Error: None
Traceback (most recent call last):
  File "/usr/local/bin/bench", line 9, in <module>
    load_entry_point('bench==0.1', 'console_scripts', 'bench')()
  File "/opt/erpnext/bench-repo/bench/cli.py", line 26, in cli
    return bench()
  File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 488, in __call__
    return self.main(*args, **kwargs)
  File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 474, in main
    self.invoke(ctx)
  File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 758, in invoke
    return self.invoke_subcommand(ctx, cmd, cmd_name, ctx.args[1:])
  File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 767, in invoke_subcommand
    return cmd.invoke(cmd_ctx)
  File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 659, in invoke
    ctx.invoke(self.callback, **ctx.params)
  File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 325, in invoke
    return callback(*args, **kwargs)
  File "/opt/erpnext/bench-repo/bench/cli.py", line 117, in migrate_3to4
    site=path))
  File "/opt/erpnext/bench-repo/bench/utils.py", line 50, in exec_cmd
    subprocess.check_call(cmd, cwd=cwd, shell=True)
  File "/usr/lib/python2.7/subprocess.py", line 511, in check_call
    raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command 'env/bin/python /opt/erpnext/bench-repo/bench/migrate3to4.py /opt/erpnext' returned non-zero exit status 1

I try to redo all the steps, now in sudo pip install -e bench-repo

I saw this:

------------------------------------------------------------
/usr/local/bin/pip run on Fri Aug  1 14:19:01 2014
bench-repomc should either by a path to a local project or a VCS url beginning with svn+, git+, hg+, or bzr+

Exception information:
Traceback (most recent call last):
  File "/usr/local/lib/python2.7/dist-packages/pip/basecommand.py", line 134, in main
    status = self.run(options, args)
  File "/usr/local/lib/python2.7/dist-packages/pip/commands/install.py", line 218, in run
    InstallRequirement.from_editable(name, default_vcs=options.default_vcs))
  File "/usr/local/lib/python2.7/dist-packages/pip/req.py", line 81, in from_editable
    name, url, extras_override = parse_editable(editable_req, default_vcs)
  File "/usr/local/lib/python2.7/dist-packages/pip/req.py", line 1516, in parse_editable
    '%s should either by a path to a local project or a VCS url beginning with svn+, git+, hg+, or bzr+' % editable_req)
InstallationError: bench-repomc should either by a path to a local project or a VCS url beginning with svn+, git+, hg+, or bzr+


On Friday, 1 August 2014 14:12:23 UTC+8, Pratik Vyas wrote:
On Fri, Aug 1, 2014 at 11:00 AM, CJ <jo...@gmail.com> wrote:
> Hi, no. I still get the exact same error message the stracetrace message.
>

There will be two traces, one would be called process error (below)
and the other one which we're interested in will be above.

The trace that you shared had "Site already exists" exception. Is that
what you got?

> On Friday, 1 August 2014 12:21:20 UTC+8, Pratik Vyas wrote:
>>
>> On Fri, Aug 1, 2014 at 7:18 AM, CJ <jo...@gmail.com> wrote:
>> > Hi I did the 3 commands, and I still get the exact error.
>> >
>>
>> Do you mean, "Site already exists"?
>
> --
> Note:
>
> If you are posting an issue,
>
> 1. ERPNext is a free and open source software and support is given on this
> forum by a team (https://frappe.io/webnotes). So please consider donating if
> you find this forum useful (https://frappe.io/buy). Even a small amount
> would be helpful.
> 2. We should be able to replicate it at our end. So please give us as much
> information as you can. Please see it from the point of view of the person
> receiving the communication.
> 3. Paste your code at http://pastebin.com or http://gist.github.com and send
> only the URL via email
> 4. For sending images, use http://imgur.com or other similar services. Do
> not send images as attachments. Links are good. Same goes for any file you
> are going to send.
>
> End of Note
> ---
> You received this message because you are subscribed to the Google Groups
> "ERPNext Developer Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to erpnext-developer-forum+un...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/erpnext-developer-forum/0b50d7fb-a803-4c53-b384-03c5e553e874%40googlegroups.com.
>
> For more options, visit https://groups.google.com/d/optout.


Thanks,
--
Pratik
erpnext



Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/9fe0c40c-dfe4-437e-9b56-6bc82e7ad25e%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.

Exception: Site already exists

Can you confirm that sites/erpnext dir doesn’t exist?

Also, no need to install bench-repo again as it’s already installed.

Thanks,

Pratik
erpnext

I saw sites/erpnext in ~/frappe-bench


On Fri, Aug 1, 2014 at 2:43 PM, Pratik Vyas <pd...@gmail.com> wrote:
> Exception: Site already exists

Can you confirm that sites/erpnext dir doesn't exist?


Also, no need to install bench-repo again as it's already installed.

Thanks,
--
Pratik
erpnext

--
Note:

If you are posting an issue,

1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to a topic in the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this topic, visit https://groups.google.com/d/topic/erpnext-developer-forum/obQa_4g1RY0/unsubscribe.

To unsubscribe from this group and all its topics, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAG8U0EksmxBt2jLLGFY7a9HmzLunCEpO201YdaiBO0hmWvLr6Q%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.



Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAJzzcV1wbSU7fLFrNSCqZqvN8fEdWPs0-ZTp_rQd9i1A8DGSjQ%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.

On Fri, Aug 1, 2014 at 12:15 PM, Joven Chiew ia...@gmail.com wrote:

I saw sites/erpnext in ~/frappe-bench

Can you move the sites/erpnext dir somewhere safe and try again. I
think the exception might have occoured somewhere else (say, in
patching).

The problem is that if you the command again, then the dir would exist
and will show a “site already exists exception”

Thanks,

Pratik
erpnext

Hi, This is what I get after I mv the sites/erpnext:
Traceback (most recent call last):
  File "/tmp/bench-repo/bench/migrate3to4.py", line 98, in <module>
    main(args.site)
  File "/tmp/bench-repo/bench/migrate3to4.py", line 37, in main
    site = copy_site(path)
  File "/tmp/bench-repo/bench/migrate3to4.py", line 49, in copy_site
    os.mkdir(site_path)
OSError: [Errno 2] No such file or directory: 'sites/erpnext'
Error: None
Traceback (most recent call last):
  File "/usr/local/bin/bench", line 9, in <module>
    load_entry_point('bench==0.1', 'console_scripts', 'bench')()
  File "/tmp/bench-repo/bench/cli.py", line 26, in cli
    return bench()
  File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 488, in __call__
    return self.main(*args, **kwargs)
  File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 474, in main
    self.invoke(ctx)
  File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 758, in invoke
    return self.invoke_subcommand(ctx, cmd, cmd_name, ctx.args[1:])
  File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 767, in invoke_subcommand
    return cmd.invoke(cmd_ctx)
  File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 659, in invoke
    ctx.invoke(self.callback, **ctx.params)
  File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 325, in invoke
    return callback(*args, **kwargs)
  File "/tmp/bench-repo/bench/cli.py", line 117, in migrate_3to4
    site=path))
  File "/tmp/bench-repo/bench/utils.py", line 50, in exec_cmd
    subprocess.check_call(cmd, cwd=cwd, shell=True)
  File "/usr/lib/python2.7/subprocess.py", line 511, in check_call
    raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command 'env/bin/python /tmp/bench-repo/bench/migrate3to4.py /opt/erpnext' returned non-zero exit status 1


On Friday, 1 August 2014 15:24:06 UTC+8, Pratik Vyas wrote:
On Fri, Aug 1, 2014 at 12:15 PM, Joven Chiew <ia...@gmail.com> wrote:
> I saw sites/erpnext in ~/frappe-bench
>

Can you move the sites/erpnext dir somewhere safe and try again. I
think the exception might have occoured somewhere else (say, in
patching).

The problem is that if you the command again, then the dir would exist
and will show a "site already exists exception"

Thanks,
--
Pratik
erpnext



Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/56f6bb84-e03d-4826-917b-18c8d7634d01%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.

On Fri, Aug 1, 2014 at 1:35 PM, CJ jo...@gmail.com wrote:

Hi, This is what I get after I mv the sites/erpnext:
Traceback (most recent call last):
File “/tmp/bench-repo/bench/migrate3to4.py”, line 98, in
main(args.site)
File “/tmp/bench-repo/bench/migrate3to4.py”, line 37, in main
site = copy_site(path)
File “/tmp/bench-repo/bench/migrate3to4.py”, line 49, in copy_site
os.mkdir(site_path)
OSError: [Errno 2] No such file or directory: ‘sites/erpnext’
Error: None
Traceback (most recent call last):
File “/usr/local/bin/bench”, line 9, in
load_entry_point(‘bench==0.1’, ‘console_scripts’, ‘bench’)()
File “/tmp/bench-repo/bench/cli.py”, line 26, in cli
return bench()
File “/usr/local/lib/python2.7/dist-packages/click/core.py”, line 488, in
call
return self.main(*args, **kwargs)
File “/usr/local/lib/python2.7/dist-packages/click/core.py”, line 474, in
main
self.invoke(ctx)
File “/usr/local/lib/python2.7/dist-packages/click/core.py”, line 758, in
invoke
return self.invoke_subcommand(ctx, cmd, cmd_name, ctx.args[1:])
File “/usr/local/lib/python2.7/dist-packages/click/core.py”, line 767, in
invoke_subcommand
return cmd.invoke(cmd_ctx)
File “/usr/local/lib/python2.7/dist-packages/click/core.py”, line 659, in
invoke
ctx.invoke(self.callback, **ctx.params)
File “/usr/local/lib/python2.7/dist-packages/click/core.py”, line 325, in
invoke
return callback(*args, **kwargs)
File “/tmp/bench-repo/bench/cli.py”, line 117, in migrate_3to4
site=path))
File “/tmp/bench-repo/bench/utils.py”, line 50, in exec_cmd
subprocess.check_call(cmd, cwd=cwd, shell=True)
File “/usr/lib/python2.7/subprocess.py”, line 511, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command ‘env/bin/python
/tmp/bench-repo/bench/migrate3to4.py /opt/erpnext’ returned non-zero exit
status 1

On Friday, 1 August 2014 15:24:06 UTC+8, Pratik Vyas wrote:

On Fri, Aug 1, 2014 at 12:15 PM, Joven Chiew ia...@gmail.com wrote:

I saw sites/erpnext in ~/frappe-bench

Can you move the sites/erpnext dir somewhere safe and try again. I
think the exception might have occoured somewhere else (say, in
patching).

The problem is that if you the command again, then the dir would exist
and will show a “site already exists exception”

Thanks,

Pratik
erpnext


Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this
    forum by a team (https://frappe.io/webnotes). So please consider donating if
    you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send
    only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/56f6bb84-e03d-4826-917b-18c8d7634d01%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

I’ll be migrating a site to version 4 today. Let me see if anything is
wrong with the script.


Pratik
erpnext

Hi, any finding? Is the script successful over your side?

On Friday, 1 August 2014 16:42:45 UTC+8, Pratik Vyas wrote:
On Fri, Aug 1, 2014 at 1:35 PM, CJ <jo...@gmail.com> wrote:
> Hi, This is what I get after I mv the sites/erpnext:
> Traceback (most recent call last):
>   File "/tmp/bench-repo/bench/migrate3to4.py", line 98, in <module>
>     main(args.site)
>   File "/tmp/bench-repo/bench/migrate3to4.py", line 37, in main
>     site = copy_site(path)
>   File "/tmp/bench-repo/bench/migrate3to4.py", line 49, in copy_site
>     os.mkdir(site_path)
> OSError: [Errno 2] No such file or directory: 'sites/erpnext'
> Error: None
> Traceback (most recent call last):
>   File "/usr/local/bin/bench", line 9, in <module>
>     load_entry_point('bench==0.1', 'console_scripts', 'bench')()
>   File "/tmp/bench-repo/bench/cli.py", line 26, in cli
>     return bench()
>   File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 488, in
> __call__
>     return self.main(*args, **kwargs)
>   File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 474, in
> main
>     self.invoke(ctx)
>   File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 758, in
> invoke
>     return self.invoke_subcommand(ctx, cmd, cmd_name, ctx.args[1:])
>   File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 767, in
> invoke_subcommand
>     return cmd.invoke(cmd_ctx)
>   File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 659, in
> invoke
>     ctx.invoke(self.callback, **ctx.params)
>   File "/usr/local/lib/python2.7/dist-packages/click/core.py", line 325, in
> invoke
>     return callback(*args, **kwargs)
>   File "/tmp/bench-repo/bench/cli.py", line 117, in migrate_3to4
>     site=path))
>   File "/tmp/bench-repo/bench/utils.py", line 50, in exec_cmd
>     subprocess.check_call(cmd, cwd=cwd, shell=True)
>   File "/usr/lib/python2.7/subprocess.py", line 511, in check_call
>     raise CalledProcessError(retcode, cmd)
> subprocess.CalledProcessError: Command 'env/bin/python
> /tmp/bench-repo/bench/migrate3to4.py /opt/erpnext' returned non-zero exit
> status 1
>
>
> On Friday, 1 August 2014 15:24:06 UTC+8, Pratik Vyas wrote:
>>
>> On Fri, Aug 1, 2014 at 12:15 PM, Joven Chiew <ia...@gmail.com> wrote:
>> > I saw sites/erpnext in ~/frappe-bench
>> >
>>
>> Can you move the sites/erpnext dir somewhere safe and try again. I
>> think the exception might have occoured somewhere else (say, in
>> patching).
>>
>> The problem is that if you the command again, then the dir would exist
>> and will show a "site already exists exception"
>>
>> Thanks,
>> --
>> Pratik
>> erpnext
>
> --
> Note:
>
> If you are posting an issue,
>
> 1. ERPNext is a free and open source software and support is given on this
> forum by a team (https://frappe.io/webnotes). So please consider donating if
> you find this forum useful (https://frappe.io/buy). Even a small amount
> would be helpful.
> 2. We should be able to replicate it at our end. So please give us as much
> information as you can. Please see it from the point of view of the person
> receiving the communication.
> 3. Paste your code at http://pastebin.com or http://gist.github.com and send
> only the URL via email
> 4. For sending images, use http://imgur.com or other similar services. Do
> not send images as attachments. Links are good. Same goes for any file you
> are going to send.
>
> End of Note
> ---
> You received this message because you are subscribed to the Google Groups
> "ERPNext Developer Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to erpnext-developer-forum+un...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/erpnext-developer-forum/56f6bb84-e03d-4826-917b-18c8d7634d01%40googlegroups.com.
>
> For more options, visit https://groups.google.com/d/optout.

I'll be migrating a site to version 4 today. Let me see if anything is
wrong with the script.

--
Pratik
erpnext



Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/a57c08df-72ab-4ac0-a413-055bd2953d76%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.

On Sun, Aug 3, 2014 at 8:12 PM, CJ jo...@gmail.com wrote:

Hi, any finding? Is the script successful over your side?

Hey,
Sorry for the late reply. It did work well for me the other day.
So, it atleast confirms that doesn’t always complain about “Site
already exists”.

Command ‘env/bin/python /tmp/bench-repo/bench/
migrate3to4.py /opt/erpnext’ returned non-zero exit status 1

Also, this command is weird. Why is your bench repo in tmp?
and bench dir in /tmp/bench-repo/bench?

For a fresh start please do the following

cd /opt
bench init frappe-bench
cd frappe-bench
bench migrate-3to4 /opt/erpnext

On Friday, 1 August 2014 16:42:45 UTC+8, Pratik Vyas wrote:

On Fri, Aug 1, 2014 at 1:35 PM, CJ jo...@gmail.com wrote:

Hi, This is what I get after I mv the sites/erpnext:
Traceback (most recent call last):
File “/tmp/bench-repo/bench/migrate3to4.py”, line 98, in
main(args.site)
File “/tmp/bench-repo/bench/migrate3to4.py”, line 37, in main
site = copy_site(path)
File “/tmp/bench-repo/bench/migrate3to4.py”, line 49, in copy_site
os.mkdir(site_path)
OSError: [Errno 2] No such file or directory: ‘sites/erpnext’
Error: None
Traceback (most recent call last):
File “/usr/local/bin/bench”, line 9, in
load_entry_point(‘bench==0.1’, ‘console_scripts’, ‘bench’)()
File “/tmp/bench-repo/bench/cli.py”, line 26, in cli
return bench()
File “/usr/local/lib/python2.7/dist-packages/click/core.py”, line 488,
in
call
return self.main(*args, **kwargs)
File “/usr/local/lib/python2.7/dist-packages/click/core.py”, line 474,
in
main
self.invoke(ctx)
File “/usr/local/lib/python2.7/dist-packages/click/core.py”, line 758,
in
invoke
return self.invoke_subcommand(ctx, cmd, cmd_name, ctx.args[1:])
File “/usr/local/lib/python2.7/dist-packages/click/core.py”, line 767,
in
invoke_subcommand
return cmd.invoke(cmd_ctx)
File “/usr/local/lib/python2.7/dist-packages/click/core.py”, line 659,
in
invoke
ctx.invoke(self.callback, **ctx.params)
File “/usr/local/lib/python2.7/dist-packages/click/core.py”, line 325,
in
invoke
return callback(*args, **kwargs)
File “/tmp/bench-repo/bench/cli.py”, line 117, in migrate_3to4
site=path))
File “/tmp/bench-repo/bench/utils.py”, line 50, in exec_cmd
subprocess.check_call(cmd, cwd=cwd, shell=True)
File “/usr/lib/python2.7/subprocess.py”, line 511, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command ‘env/bin/python
/tmp/bench-repo/bench/migrate3to4.py /opt/erpnext’ returned non-zero
exit
status 1

On Friday, 1 August 2014 15:24:06 UTC+8, Pratik Vyas wrote:

On Fri, Aug 1, 2014 at 12:15 PM, Joven Chiew ia...@gmail.com wrote:

I saw sites/erpnext in ~/frappe-bench

Can you move the sites/erpnext dir somewhere safe and try again. I
think the exception might have occoured somewhere else (say, in
patching).

The problem is that if you the command again, then the dir would exist
and will show a “site already exists exception”

Thanks,

Pratik
erpnext


Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this
    forum by a team (https://frappe.io/webnotes). So please consider
    donating if
    you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much
    information as you can. Please see it from the point of view of the
    person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send
    only the URL via email
  4. For sending images, use http://imgur.com or other similar services.
    Do
    not send images as attachments. Links are good. Same goes for any file
    you
    are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send
an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit

https://groups.google.com/d/msgid/erpnext-developer-forum/56f6bb84-e03d-4826-917b-18c8d7634d01%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

I’ll be migrating a site to version 4 today. Let me see if anything is
wrong with the script.


Pratik
erpnext


Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this
    forum by a team (https://frappe.io/webnotes). So please consider donating if
    you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send
    only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/a57c08df-72ab-4ac0-a413-055bd2953d76%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.

Thanks,

Pratik
erpnext

Hi ,

I am also trying to update from version 3 to 4 and getting the same error message while following the migration doc from here : https://github.com/frappe/bench/wiki/Migrating-from-ERPNext-version-3

The error mesage is
exception: Site already exists
Error: None

However when i check the folder /home/erpnext/frappe-bench/sites there is no site by name erpnext there.

How to migrate my version 3 to 4 now ? moreover my version 3 is hosted in Virtual Box downloaded from ERPNext website.