When I run python2.7 setup.py install, then...UnknownTimeZoneError

It is a Blank New CentOS 6.4 and yum -y update to 6.5(Final), Please help , Thank you very much
 Please take a Look the result
http://pastebin.com/TCwhz1Pf

and 

the following is my install procedure

ln -sf /usr/share/zoneinfo/Hongkong /etc/localtime
yum groupinstall -y development
yum install -y zlib-dev openssl-devel sqlite-devel bzip2-devel
yum install xz-libs
wget http://www.python.org/ftp/python/2.7.6/Python-2.7.6.tar.xz
xz -d Python-2.7.6.tar.xz
tar -xvf Python-2.7.6.tar
cd Python-2.7.6
./configure --prefix=/usr/local
make
make altinstall
export PATH="/usr/local/bin:$PATH"
wget --no-check-certificate https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz
tar -xvf setuptools-1.4.2.tar.gz
cd setuptools-1.4.2
python2.7 setup.py install
curl https://raw.github.com/pypa/pip/master/contrib/get-pip.py | python2.7 -
pip install virtualenv
pip install werkzeug
easy_install --upgrade pytz

yum install passwd


wget https://raw.github.com/webnotes/erpnext/master/install_erpnext.py


python2.7 install_erpnext.py --create_user



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/a09fa738-b555-490c-9fc7-23da493dfde9%40googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

Hi Ong,

Can you try to re install pytz or install a different version?

On Wed, Mar 5, 2014 at 12:13 PM, Ong Willie wi...@geekstek.com wrote:

It is a Blank New CentOS 6.4 and yum -y update to 6.5(Final), Please help ,
Thank you very much
Please take a Look the result
http://pastebin.com/TCwhz1Pf

and

the following is my install procedure

ln -sf /usr/share/zoneinfo/Hongkong /etc/localtime

yum groupinstall -y development

yum install -y zlib-dev openssl-devel sqlite-devel bzip2-devel

yum install xz-libs

wget http://www.python.org/ftp/python/2.7.6/Python-2.7.6.tar.xz

xz -d Python-2.7.6.tar.xz

tar -xvf Python-2.7.6.tar

cd Python-2.7.6

./configure --prefix=/usr/local

make

make altinstall

export PATH="/usr/local/bin:$PATH"

wget --no-check-certificate
https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz

tar -xvf setuptools-1.4.2.tar.gz

cd setuptools-1.4.2

python2.7 setup.py install

curl https://raw.github.com/pypa/pip/master/contrib/get-pip.py | python2.7 -

pip install virtualenv

pip install werkzeug

easy_install --upgrade pytz

yum install passwd

wget https://raw.github.com/webnotes/erpnext/master/install_erpnext.py

python2.7 install_erpnext.py --create_user


Note:

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send
    only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/a09fa738-b555-490c-9fc7-23da493dfde9%40googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.


Pratik
erpnext

Hi Pratik,

Thank you for the reply, 
I was uninstall the pytz by using:
 rm -rf pytz
 rm -rf pytz-2013d-py2.7.egg-info/
and 
install again
easy_install pytz
it shows:

--------------------------------------------------------------------------------
Installing Packages: (This may take some time)
gcc MySQL-python git memcached ntp vim-enhanced screen
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Installing Python Modules: (This may take some time)
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
Pre-requisites Installed
--------------------------------------------------------------------------------
Traceback (most recent call last):
  File "install_erpnext.py", line 299, in <module>
    os.mkdir(install_path)
OSError: [Errno 17] File exists: '/home/erpnext/erpnext'


On Wednesday, March 5, 2014 2:46:48 PM UTC+8, Pratik Vyas wrote:
Hi Ong,

Can you try to re install pytz or install a different version?

On Wed, Mar 5, 2014 at 12:13 PM, Ong Willie <wi...@geekstek.com> wrote:
> It is a Blank New CentOS 6.4 and yum -y update to 6.5(Final), Please help ,
> Thank you very much
>  Please take a Look the result
> http://pastebin.com/TCwhz1Pf
>
> and
>
> the following is my install procedure
>
> ln -sf /usr/share/zoneinfo/Hongkong /etc/localtime
>
> yum groupinstall -y development
>
> yum install -y zlib-dev openssl-devel sqlite-devel bzip2-devel
>
> yum install xz-libs
>
> wget http://www.python.org/ftp/python/2.7.6/Python-2.7.6.tar.xz
>
> xz -d Python-2.7.6.tar.xz
>
> tar -xvf Python-2.7.6.tar
>
> cd Python-2.7.6
>
> ./configure --prefix=/usr/local
>
> make
>
> make altinstall
>
> export PATH="/usr/local/bin:$PATH"
>
> wget --no-check-certificate
> https://pypi.python.org/packages/source/s/setuptools/setuptools-1.4.2.tar.gz
>
> tar -xvf setuptools-1.4.2.tar.gz
>
> cd setuptools-1.4.2
>
> python2.7 setup.py install
>
> curl https://raw.github.com/pypa/pip/master/contrib/get-pip.py | python2.7 -
>
> pip install virtualenv
>
> pip install werkzeug
>
> easy_install --upgrade pytz
>
> yum install passwd
>
>
> wget https://raw.github.com/webnotes/erpnext/master/install_erpnext.py
>
>
> python2.7 install_erpnext.py --create_user
>
> --
> Note:
>
> If you are posting an issue,
> 1. We should be able to replicate it at our end. So please give us as much
> information as you can. Please see it from the point of view of the person
> receiving the communication.
> 2. Paste your code at http://pastebin.com or http://gist.github.com and send
> only the URL via email
> 3. For sending images, use http://imgur.com or other similar services. Do
> not send images as attachments. Links are good. Same goes for any file you
> are going to send.
>
> End of Note
> ---
> You received this message because you are subscribed to the Google Groups
> "ERPNext Developer Forum" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to erpnext-developer-forum+un...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/erpnext-developer-forum/a09fa738-b555-490c-9fc7-23da493dfde9%40googlegroups.com.
> For more options, visit https://groups.google.com/groups/opt_out.



--
Pratik
erpnext



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/8b8f3e8f-ae63-4ffe-b575-8fadccf859d6%40googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.