User Properties

Hi, Guys!

I’m not finding the user properties, it was replaced?



Best Regards.

Maxwell Morais
Python Developer powered by Webnotes framework <3
+55 11 954329659




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CABK1YkMcvAoLtwgdAN5xgXh1An3eAOHOLgBioDXc-hTv9yLUsw%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
Yes. It is not User Permissions.
Check this wip-help guide: https://github.com/frappe/erpnext_org/pull/4

-Anand.



On Fri, Jun 27, 2014 at 10:25 PM, Maxwell Morais <ma…@gmail.com> wrote:
Hi, Guys!

I’m not finding the user properties, it was replaced?



Best Regards.

Maxwell Morais
Python Developer powered by Webnotes framework <3
+55 11 954329659




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CABK1YkMcvAoLtwgdAN5xgXh1An3eAOHOLgBioDXc-hTv9yLUsw%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAAQzbF3smHaU8hJ%3Dxaqg0cCXC9OkjhghYG3B1ADkn8rrBku_LA%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
Ok, Anand, here I understand!
But first, I had a very useful option to set default values there was a particular user through the user properties, for example, I own users who can create sales orders for one unit only, and others that can create for many, those that can create for various already know what they should do in these situations, selecting the company, but the others are accustomed to erp assign to them a series of standardized options, before I defined the properties of user!

And now what do I do?


2014-06-27 15:29 GMT-03:00 Anand Doshi <an...@erpnext.com>:
Yes. It is not User Permissions.
Check this wip-help guide: https://github.com/frappe/erpnext_org/pull/4

-Anand.



On Fri, Jun 27, 2014 at 10:25 PM, Maxwell Morais <ma…@gmail.com> wrote:
Hi, Guys!

I’m not finding the user properties, it was replaced?



Best Regards.

Maxwell Morais
Python Developer powered by Webnotes framework <3



Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CABK1YkMcvAoLtwgdAN5xgXh1An3eAOHOLgBioDXc-hTv9yLUsw%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.




Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAAQzbF3smHaU8hJ%3Dxaqg0cCXC9OkjhghYG3B1ADkn8rrBku_LA%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.




--

Best Regards.

Maxwell Morais
Python Developer powered by Webnotes framework <3
+55 11 954329659




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CABK1YkPzCc%2BCBc4kk_a%3DhmbKLqeG%2BmeVNoRVPpoPGUfdowNSTQ%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
Max, 

User permissions also double up as defaults - maybe we must add it to the document ( or make it clear in the page )


On 28-Jun-2014, at 12:50 am, Maxwell Morais <ma...@gmail.com> wrote:

Ok, Anand, here I understand! 
But first, I had a very useful option to set default values there was a particular user through the user properties, for example, I own users who can create sales orders for one unit only, and others that can create for many, those that can create for various already know what they should do in these situations, selecting the company, but the others are accustomed to erp assign to them a series of standardized options, before I defined the properties of user! 

And now what do I do?


2014-06-27 15:29 GMT-03:00 Anand Doshi <an...@erpnext.com>:
Yes. It is not User Permissions.
Check this wip-help guide: https://github.com/frappe/erpnext_org/pull/4

-Anand.



On Fri, Jun 27, 2014 at 10:25 PM, Maxwell Morais <ma…@gmail.com> wrote:
Hi, Guys!

I’m not finding the user properties, it was replaced?



Best Regards.

Maxwell Morais
Python Developer powered by Webnotes framework <3



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CABK1YkMcvAoLtwgdAN5xgXh1An3eAOHOLgBioDXc-hTv9yLUsw%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.





Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAAQzbF3smHaU8hJ%3Dxaqg0cCXC9OkjhghYG3B1ADkn8rrBku_LA%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.




--

Best Regards.

Maxwell Morais
Python Developer powered by Webnotes framework <3
+55 11 954329659





Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CABK1YkPzCc%2BCBc4kk_a%3DhmbKLqeG%2BmeVNoRVPpoPGUfdowNSTQ%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/24C56233-8693-47EA-B26A-20D8B0FA2957%40gmail.com.

    For more options, visit https://groups.google.com/d/optout.