Supplier did not save

1
Hi,

I am just starting to use ERPNext.  I have set up one supplier already.  I am trying to set up the second supplier but when I press 'save' for a new supplier the "Message: Did not save" pops up.  Any ideas on what I can do to correct this?  If I need to provide more information, please tell me how and what information you need.

Thank you for the help.

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/79f87fee-942e-4a75-b6be-2b122a664e1c%40googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
2

Hi,

Please share the browser console message.

On Feb 8, 2014 9:58 AM, "JAG" <ja...@pcbgrip.com> wrote:
Hi,

I am just starting to use ERPNext. I have set up one supplier already. I am trying to set up the second supplier but when I press 'save' for a new supplier the "Message: Did not save" pops up. Any ideas on what I can do to correct this? If I need to provide more information, please tell me how and what information you need.

Thank you for the help.

–

Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/79f87fee-942e-4a75-b6be-2b122a664e1c%40googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAKuMqm3P%3D8b_MNU-GDsM_okZOFrEsuVgbYTYgdn-sRSh_WnAGQ%40mail.gmail.com.

    For more options, visit https://groups.google.com/groups/opt_out.
3
Please tell me how to get the code.  I am new to this and don't know how.  Thanks.

On Friday, February 7, 2014 11:28:25 PM UTC-5, JAG wrote:
Hi,

I am just starting to use ERPNext.  I have set up one supplier already.  I am trying to set up the second supplier but when I press 'save' for a new supplier the "Message: Did not save" pops up.  Any ideas on what I can do to correct this?  If I need to provide more information, please tell me how and what information you need.

Thank you for the help.

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/bfd4d914-76e7-4550-9bad-657d441380da%40googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
4

Press Ctrl + Shift + J if you are using Google Chrome, share it via pastebin.com or other services like it.

On Feb 8, 2014 10:21 AM, "JAG" <ja...@pcbgrip.com> wrote:
Please tell me how to get the code. I am new to this and don't know how. Thanks.

On Friday, February 7, 2014 11:28:25 PM UTC-5, JAG wrote:
Hi,

I am just starting to use ERPNext. I have set up one supplier already. I am trying to set up the second supplier but when I press 'save' for a new supplier the "Message: Did not save" pops up. Any ideas on what I can do to correct this? If I need to provide more information, please tell me how and what information you need.

Thank you for the help.

–

Note:



If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/bfd4d914-76e7-4550-9bad-657d441380da%40googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAKuMqm033y7SZcOV1dc3XZZOuTFJ%3DWJHHBVmSxqraxMQrWTVrQ%40mail.gmail.com.

    For more options, visit https://groups.google.com/groups/opt_out.
5
Here is the code:

http://pastebin.com/sH6jRPSd

Thanks

–

Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/c3bfb652-80fa-4d80-9ddc-37119193d890%40googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.
6

Hi Jason,

What is the value of Supplier Naming in Buying > Buying Settings? I suppose it is Naming Series?

Try this: Save Buying Settings again, then go to Tools > Clear Cache & Refresh. Then try saving a Supplier again. Make sure there is a value in the field Naming Series in the supplier form.

Best,
Anand Doshi.

On 8 February 2014 at 10:34:52 am, JAG (ja...@pcbgrip.com) wrote:

Here is the code:

Cleared App Cache. all-app.min.js:161Cleared localstorage all-app.min.js:162 - Pastebin.com

Thanks

–
Note:

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us
    as much information as you can. Please see it from the point of
    view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com
    and send only the URL via email
  3. For sending images, use http://imgur.com or other similar
    services. Do not send images as attachments. Links are good.
    Same goes for any file you are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from
it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/c3bfb652-80fa-4d80-9ddc-37119193d890%40googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

–
Note:

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/etPan.52f5e7e1.12200854.128%40macbook.local.
For more options, visit https://groups.google.com/groups/opt_out.