[Important] Searches in Link fields will honour Permission Rules

Hi everyone,

With the new release, we have also made searches in Link fields to honour permission rules.

Hence, once you upgrade, you might start receiving permission errors.

If any of your users receive such error, just go to Setup > Permission Manager and add read permission for that Role.

We regret the inconvenience this will cause. However, this is a step in the right direction.

Thanks,
Anand Doshi.


Note:

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.

Already noticed the same and honestly I support this step towards the right direction

I know it might cause some pain to the system managers but I think this is going to be a one time pain for the fruits to reap for future
Great addition....now I hope someday the reports would also honor the permissions

On 23 Jul 2013 17:47, "Anand Doshi" <an...@iwebnotes.com> wrote:
Hi everyone,

With the new release, we have also made searches in Link fields to honour permission rules.

Hence, once you upgrade, you might start receiving permission errors.

If any of your users receive such error, just go to Setup > Permission Manager and add read permission for that Role.

We regret the inconvenience this will cause. However, this is a step in the right direction.

Thanks,
Anand Doshi.

--
Note:

If you are posting an issue,
1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

     

     
Hi Aditya,

All standard reports have also been changed to honour permissions.

Cheers,
Anand.

On 23-Jul-2013, at 5:53 PM, Aditya Duggal <ad...@rigpl.com> wrote:

Already noticed the same and honestly I support this step towards the right direction

I know it might cause some pain to the system managers but I think this is going to be a one time pain for the fruits to reap for future
Great addition....now I hope someday the reports would also honor the permissions

On 23 Jul 2013 17:47, "Anand Doshi" <an...@iwebnotes.com> wrote:
Hi everyone,

With the new release, we have also made searches in Link fields to honour permission rules.

Hence, once you upgrade, you might start receiving permission errors.

If any of your users receive such error, just go to Setup > Permission Manager and add read permission for that Role.

We regret the inconvenience this will cause. However, this is a step in the right direction.

Thanks,
Anand Doshi.

--
Note:

If you are posting an issue,
1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.





Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

     

     



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

     

     

Does this include the Query Report and Script Reports?

If yes, then do I need to write some code to get the reports to follow the rules?

On Tuesday, 23 July 2013 17:55:49 UTC+5:30, Anand Doshi wrote:
Hi Aditya,

All standard reports have also been changed to honour permissions.

Cheers,
Anand.

On 23-Jul-2013, at 5:53 PM, Aditya Duggal <ad…@rigpl.com> wrote:

Already noticed the same and honestly I support this step towards the right direction

I know it might cause some pain to the system managers but I think this is going to be a one time pain for the fruits to reap for future

Great addition…now I hope someday the reports would also honor the permissions

On 23 Jul 2013 17:47, "Anand Doshi" <an...@iwebnotes.com> wrote:
Hi everyone,

With the new release, we have also made searches in Link fields to honour permission rules.

Hence, once you upgrade, you might start receiving permission errors.

If any of your users receive such error, just go to Setup > Permission Manager and add read permission for that Role.

We regret the inconvenience this will cause. However, this is a step in the right direction.

Thanks,
Anand Doshi.

--
Note:

If you are posting an issue,
1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.





Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

     

     



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

     

     
Hi Aditya,

Nabin just clarified with me that we had manually written code to apply permissions selectively in script reports. It doesn't get applied automatically. Have a look at standard script reports to get an idea about how to do it.

Applying permission rules is currently not possible for query reports.

Thanks,
Anand.

On 23-Jul-2013, at 7:25 PM, Addy <ad...@rigpl.com> wrote:

Does this include the Query Report and Script Reports?
If yes, then do I need to write some code to get the reports to follow the rules?

On Tuesday, 23 July 2013 17:55:49 UTC+5:30, Anand Doshi wrote:
Hi Aditya,

All standard reports have also been changed to honour permissions.

Cheers,
Anand.

On 23-Jul-2013, at 5:53 PM, Aditya Duggal <ad...@rigpl.com> wrote:

Already noticed the same and honestly I support this step towards the right direction

I know it might cause some pain to the system managers but I think this is going to be a one time pain for the fruits to reap for future
Great addition....now I hope someday the reports would also honor the permissions

On 23 Jul 2013 17:47, "Anand Doshi" <an...@iwebnotes.com> wrote:
Hi everyone,

With the new release, we have also made searches in Link fields to honour permission rules.

Hence, once you upgrade, you might start receiving permission errors.

If any of your users receive such error, just go to Setup > Permission Manager and add read permission for that Role.

We regret the inconvenience this will cause. However, this is a step in the right direction.

Thanks,
Anand Doshi.

--
Note:

If you are posting an issue,
1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note
---
You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.





Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

     

     




Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.

     

     



Note:

 

If you are posting an issue,

  1. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  2. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  3. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note



    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.

    For more options, visit https://groups.google.com/groups/opt_out.