Generators in frappe

1
Hi Rushabh,

I want to add a new page similar to Contact Us. I made a go through, I figured out that we have to add Template and Controller in Website Route.

When I tried to create new record in Website Route, it not permits me (logged in as Administrator) . So I have created a web page and then I am trying to change the Template and Controller's path but these two fields are not editable.

Please let me know the correct way for achieveing the same.

Thanks,
Saurabh Palande

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/c2382d0e-bac0-4522-9d6a-8fc4111b9e70%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.
2
Website Route is created automatically. Use `frappe --build_website` after you create your page.

On 22-Jul-2014, at 5:18 pm, saurabh palande <sa...@gmail.com> wrote:

Hi Rushabh,

I want to add a new page similar to Contact Us. I made a go through, I figured out that we have to add Template and Controller in Website Route.

When I tried to create new record in Website Route, it not permits me (logged in as Administrator) . So I have created a web page and then I am trying to change the Template and Controller's path but these two fields are not editable.

Please let me know the correct way for achieveing the same.

Thanks,
Saurabh Palande

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/c2382d0e-bac0-4522-9d6a-8fc4111b9e70%40googlegroups.com.

    For more options, visit https://groups.google.com/d/optout.

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/1071D62D-309C-4896-9CFA-7EA0E8985C20%40gmail.com.

    For more options, visit https://groups.google.com/d/optout.
3
Hi Rushabh,

Thank You.


On Tue, Jul 22, 2014 at 5:36 PM, Rushabh Mehta <rm...@gmail.com> wrote:
Website Route is created automatically. Use `frappe --build_website` after you create your page.


On 22-Jul-2014, at 5:18 pm, saurabh palande <sa...@gmail.com> wrote:

Hi Rushabh,

I want to add a new page similar to Contact Us. I made a go through, I figured out that we have to add Template and Controller in Website Route.

When I tried to create new record in Website Route, it not permits me (logged in as Administrator) . So I have created a web page and then I am trying to change the Template and Controller's path but these two fields are not editable.

Please let me know the correct way for achieveing the same.

Thanks,
Saurabh Palande

–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/c2382d0e-bac0-4522-9d6a-8fc4111b9e70%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.


–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/1071D62D-309C-4896-9CFA-7EA0E8985C20%40gmail.com.

For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP_skpg5-ytin8mHLsA4J-%3DQJMhdo0Mg9Cuk6AQXipkd-g%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
4
Hi Rushabh,

I have created a `registration.html` and `registration.py`. Then I execute `frappe --build_website`.
But this haven't create a page. Also there is no doctype named as 'Website Route'.
Please let me know whether I am missing .

Thanks,

On Tue, Jul 22, 2014 at 6:23 PM, Saurabh Palande <sa...@gmail.com> wrote:
Hi Rushabh,

Thank You.


On Tue, Jul 22, 2014 at 5:36 PM, Rushabh Mehta <rm...@gmail.com> wrote:
Website Route is created automatically. Use `frappe --build_website` after you create your page.


On 22-Jul-2014, at 5:18 pm, saurabh palande <sa...@gmail.com> wrote:

Hi Rushabh,

I want to add a new page similar to Contact Us. I made a go through, I figured out that we have to add Template and Controller in Website Route.

When I tried to create new record in Website Route, it not permits me (logged in as Administrator) . So I have created a web page and then I am trying to change the Template and Controller's path but these two fields are not editable.

Please let me know the correct way for achieveing the same.

Thanks,
Saurabh Palande

–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/c2382d0e-bac0-4522-9d6a-8fc4111b9e70%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.


–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/1071D62D-309C-4896-9CFA-7EA0E8985C20%40gmail.com.

For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande



--
S.S.Palande

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP-G4f6g%3D2_YPHWeyoRBE2SVemPOs79FgoMzcH4szw%2B1bw%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
5
You have to add it to hooks.py and subclass from WebsiteGenerator




On 09-Sep-2014, at 8:24 pm, Saurabh Palande <sa...@gmail.com> wrote:

Hi Rushabh,

I have created a `registration.html` and `registration.py`. Then I execute `frappe --build_website`.
But this haven't  create a page. Also there is no doctype named as 'Website Route'.  
Please let me know whether I am missing .

Thanks,

On Tue, Jul 22, 2014 at 6:23 PM, Saurabh Palande <sa...@gmail.com> wrote:
Hi Rushabh,

Thank You.


On Tue, Jul 22, 2014 at 5:36 PM, Rushabh Mehta <rm...@gmail.com> wrote:
Website Route is created automatically. Use `frappe --build_website` after you create your page.


On 22-Jul-2014, at 5:18 pm, saurabh palande <sa...@gmail.com> wrote:

Hi Rushabh,

I want to add a new page similar to Contact Us. I made a go through, I figured out that we have to add Template and Controller in Website Route.

When I tried to create new record in Website Route, it not permits me (logged in as Administrator) . So I have created a web page and then I am trying to change the Template and Controller's path but these two fields are not editable.

Please let me know the correct way for achieveing the same.

Thanks,
Saurabh Palande

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/c2382d0e-bac0-4522-9d6a-8fc4111b9e70%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.



–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/1071D62D-309C-4896-9CFA-7EA0E8985C20%40gmail.com.

For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande



--
S.S.Palande

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP-G4f6g%3D2_YPHWeyoRBE2SVemPOs79FgoMzcH4szw%2B1bw%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/B5DF86DE-FB9C-473D-9FC6-76D5BE272B38%40gmail.com.

    For more options, visit https://groups.google.com/d/optout.
6
Hi Rushabh,

I have created an App, named ass FX. Under template folder i have added registration.html and registration.py.
Then I have added `website_generators = ["registration"]` in hooks.py under my app.
But I am not getting whether to extend WebsiteGenerator.

page name is reg1.html, reg1.py and hooks entry is like `website_generators = ["reg1"]`

I want to achieve similar structure like contact us page.

Thanks,

On Wed, Sep 10, 2014 at 10:46 AM, Rushabh Mehta <rm...@gmail.com> wrote:
You have to add it to hooks.py and subclass from WebsiteGenerator




On 09-Sep-2014, at 8:24 pm, Saurabh Palande <sa...@gmail.com> wrote:

Hi Rushabh,

I have created a `registration.html` and `registration.py`. Then I execute `frappe --build_website`.
But this haven't create a page. Also there is no doctype named as 'Website Route'.
Please let me know whether I am missing .

Thanks,

On Tue, Jul 22, 2014 at 6:23 PM, Saurabh Palande <sa...@gmail.com> wrote:
Hi Rushabh,

Thank You.


On Tue, Jul 22, 2014 at 5:36 PM, Rushabh Mehta <rm...@gmail.com> wrote:
Website Route is created automatically. Use `frappe --build_website` after you create your page.


On 22-Jul-2014, at 5:18 pm, saurabh palande <sa...@gmail.com> wrote:

Hi Rushabh,

I want to add a new page similar to Contact Us. I made a go through, I figured out that we have to add Template and Controller in Website Route.

When I tried to create new record in Website Route, it not permits me (logged in as Administrator) . So I have created a web page and then I am trying to change the Template and Controller's path but these two fields are not editable.

Please let me know the correct way for achieveing the same.

Thanks,
Saurabh Palande

–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/c2382d0e-bac0-4522-9d6a-8fc4111b9e70%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.



–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/1071D62D-309C-4896-9CFA-7EA0E8985C20%40gmail.com.

For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande



--
S.S.Palande

–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP-G4f6g%3D2_YPHWeyoRBE2SVemPOs79FgoMzcH4szw%2B1bw%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.


–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/B5DF86DE-FB9C-473D-9FC6-76D5BE272B38%40gmail.com.


    For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP9Czf%3DDmKBKkM83-PBNwJQTch6P680HSc%3D7aj8OpGRkKA%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
7


On 10-Sep-2014, at 6:36 pm, Saurabh Palande <sa...@gmail.com> wrote:

Hi Rushabh,

I have created an App, named ass FX. Under template folder i have added registration.html and registration.py. 
Then I have added `website_generators = ["registration"]`  in hooks.py  under my app.
But I am not getting whether to extend WebsiteGenerator. 

           page name is reg1.html, reg1.py and hooks entry is like  `website_generators = ["reg1"]`

I want to achieve similar structure like contact us page.

You have to put it in templates/pages

no need to add generators


Thanks, 

On Wed, Sep 10, 2014 at 10:46 AM, Rushabh Mehta <rm...@gmail.com> wrote:
You have to add it to hooks.py and subclass from WebsiteGenerator




On 09-Sep-2014, at 8:24 pm, Saurabh Palande <sa...@gmail.com> wrote:

Hi Rushabh,

I have created a `registration.html` and `registration.py`. Then I execute `frappe --build_website`.
But this haven't  create a page. Also there is no doctype named as 'Website Route'.  
Please let me know whether I am missing .

Thanks,

On Tue, Jul 22, 2014 at 6:23 PM, Saurabh Palande <sa...@gmail.com> wrote:
Hi Rushabh,

Thank You.


On Tue, Jul 22, 2014 at 5:36 PM, Rushabh Mehta <rm...@gmail.com> wrote:
Website Route is created automatically. Use `frappe --build_website` after you create your page.


On 22-Jul-2014, at 5:18 pm, saurabh palande <sa...@gmail.com> wrote:

Hi Rushabh,

I want to add a new page similar to Contact Us. I made a go through, I figured out that we have to add Template and Controller in Website Route.

When I tried to create new record in Website Route, it not permits me (logged in as Administrator) . So I have created a web page and then I am trying to change the Template and Controller's path but these two fields are not editable.

Please let me know the correct way for achieveing the same.

Thanks,
Saurabh Palande

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/c2382d0e-bac0-4522-9d6a-8fc4111b9e70%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.



–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/1071D62D-309C-4896-9CFA-7EA0E8985C20%40gmail.com.

For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande



--
S.S.Palande

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP-G4f6g%3D2_YPHWeyoRBE2SVemPOs79FgoMzcH4szw%2B1bw%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.



–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/B5DF86DE-FB9C-473D-9FC6-76D5BE272B38%40gmail.com.


    For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP9Czf%3DDmKBKkM83-PBNwJQTch6P680HSc%3D7aj8OpGRkKA%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/8ADA7C06-1DC7-4956-91D2-3C1D7D088CA1%40gmail.com.

    For more options, visit https://groups.google.com/d/optout.
8
HI Rushabh,

Those file are already under `fx/fx/templates/pages`.
Should I have to move them under `frappe/frappe/templates/pages` ?

Thanks,

On Thu, Sep 11, 2014 at 10:37 AM, Rushabh Mehta <rm...@gmail.com> wrote:


On 10-Sep-2014, at 6:36 pm, Saurabh Palande <sa...@gmail.com> wrote:

Hi Rushabh,

I have created an App, named ass FX. Under template folder i have added registration.html and registration.py.
Then I have added `website_generators = ["registration"]` in hooks.py under my app.
But I am not getting whether to extend WebsiteGenerator.

page name is reg1.html, reg1.py and hooks entry is like `website_generators = ["reg1"]`

I want to achieve similar structure like contact us page.

You have to put it in templates/pages

no need to add generators


Thanks,

On Wed, Sep 10, 2014 at 10:46 AM, Rushabh Mehta <rm...@gmail.com> wrote:
You have to add it to hooks.py and subclass from WebsiteGenerator




On 09-Sep-2014, at 8:24 pm, Saurabh Palande <sa...@gmail.com> wrote:

Hi Rushabh,

I have created a `registration.html` and `registration.py`. Then I execute `frappe --build_website`.
But this haven't create a page. Also there is no doctype named as 'Website Route'.
Please let me know whether I am missing .

Thanks,

On Tue, Jul 22, 2014 at 6:23 PM, Saurabh Palande <sa...@gmail.com> wrote:
Hi Rushabh,

Thank You.


On Tue, Jul 22, 2014 at 5:36 PM, Rushabh Mehta <rm...@gmail.com> wrote:
Website Route is created automatically. Use `frappe --build_website` after you create your page.


On 22-Jul-2014, at 5:18 pm, saurabh palande <sa...@gmail.com> wrote:

Hi Rushabh,

I want to add a new page similar to Contact Us. I made a go through, I figured out that we have to add Template and Controller in Website Route.

When I tried to create new record in Website Route, it not permits me (logged in as Administrator) . So I have created a web page and then I am trying to change the Template and Controller's path but these two fields are not editable.

Please let me know the correct way for achieveing the same.

Thanks,
Saurabh Palande

–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/c2382d0e-bac0-4522-9d6a-8fc4111b9e70%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.



–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/1071D62D-309C-4896-9CFA-7EA0E8985C20%40gmail.com.

For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande



--
S.S.Palande

–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP-G4f6g%3D2_YPHWeyoRBE2SVemPOs79FgoMzcH4szw%2B1bw%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.



–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/B5DF86DE-FB9C-473D-9FC6-76D5BE272B38%40gmail.com.


    For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande

–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP9Czf%3DDmKBKkM83-PBNwJQTch6P680HSc%3D7aj8OpGRkKA%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.


–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/8ADA7C06-1DC7-4956-91D2-3C1D7D088CA1%40gmail.com.


    For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP_yLc880hOua%2BaoH5FcNEnuBWxs5qrnt3ShhFEeCzHQ%2Bw%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
9


On 11-Sep-2014, at 11:14 am, Saurabh Palande <sa...@gmail.com> wrote:

HI Rushabh,

Those file are already under `fx/fx/templates/pages`.
Should I have to move them under `frappe/frappe/templates/pages` ?

No it should work as it is.

There was a bug with clearing cache in case of new pages. It is fixed in Frappe 5.0 

As a temp solution - clear your memcache to make your page appear.


Thanks,

On Thu, Sep 11, 2014 at 10:37 AM, Rushabh Mehta <rm...@gmail.com> wrote:


On 10-Sep-2014, at 6:36 pm, Saurabh Palande <sa...@gmail.com> wrote:

Hi Rushabh,

I have created an App, named ass FX. Under template folder i have added registration.html and registration.py. 
Then I have added `website_generators = ["registration"]`  in hooks.py  under my app.
But I am not getting whether to extend WebsiteGenerator. 

           page name is reg1.html, reg1.py and hooks entry is like  `website_generators = ["reg1"]`

I want to achieve similar structure like contact us page.

You have to put it in templates/pages

no need to add generators


Thanks, 

On Wed, Sep 10, 2014 at 10:46 AM, Rushabh Mehta <rm...@gmail.com> wrote:
You have to add it to hooks.py and subclass from WebsiteGenerator




On 09-Sep-2014, at 8:24 pm, Saurabh Palande <sa...@gmail.com> wrote:

Hi Rushabh,

I have created a `registration.html` and `registration.py`. Then I execute `frappe --build_website`.
But this haven't  create a page. Also there is no doctype named as 'Website Route'.  
Please let me know whether I am missing .

Thanks,

On Tue, Jul 22, 2014 at 6:23 PM, Saurabh Palande <sa...@gmail.com> wrote:
Hi Rushabh,

Thank You.


On Tue, Jul 22, 2014 at 5:36 PM, Rushabh Mehta <rm...@gmail.com> wrote:
Website Route is created automatically. Use `frappe --build_website` after you create your page.


On 22-Jul-2014, at 5:18 pm, saurabh palande <sa...@gmail.com> wrote:

Hi Rushabh,

I want to add a new page similar to Contact Us. I made a go through, I figured out that we have to add Template and Controller in Website Route.

When I tried to create new record in Website Route, it not permits me (logged in as Administrator) . So I have created a web page and then I am trying to change the Template and Controller's path but these two fields are not editable.

Please let me know the correct way for achieveing the same.

Thanks,
Saurabh Palande

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/c2382d0e-bac0-4522-9d6a-8fc4111b9e70%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.



–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/1071D62D-309C-4896-9CFA-7EA0E8985C20%40gmail.com.

For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande



--
S.S.Palande

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP-G4f6g%3D2_YPHWeyoRBE2SVemPOs79FgoMzcH4szw%2B1bw%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.



–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/B5DF86DE-FB9C-473D-9FC6-76D5BE272B38%40gmail.com.


    For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP9Czf%3DDmKBKkM83-PBNwJQTch6P680HSc%3D7aj8OpGRkKA%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.



–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/8ADA7C06-1DC7-4956-91D2-3C1D7D088CA1%40gmail.com.


    For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP_yLc880hOua%2BaoH5FcNEnuBWxs5qrnt3ShhFEeCzHQ%2Bw%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/DDA08263-F2E1-4B9F-81BC-749818FD12CF%40gmail.com.

    For more options, visit https://groups.google.com/d/optout.
10
Hi Rushabh,

Thank You.



On Thu, Sep 11, 2014 at 12:01 PM, Rushabh Mehta <rm...@gmail.com> wrote:


On 11-Sep-2014, at 11:14 am, Saurabh Palande <sa...@gmail.com> wrote:

HI Rushabh,

Those file are already under `fx/fx/templates/pages`.
Should I have to move them under `frappe/frappe/templates/pages` ?

No it should work as it is.

There was a bug with clearing cache in case of new pages. It is fixed in Frappe 5.0

As a temp solution - clear your memcache to make your page appear.


Thanks,

On Thu, Sep 11, 2014 at 10:37 AM, Rushabh Mehta <rm...@gmail.com> wrote:


On 10-Sep-2014, at 6:36 pm, Saurabh Palande <sa...@gmail.com> wrote:

Hi Rushabh,

I have created an App, named ass FX. Under template folder i have added registration.html and registration.py.
Then I have added `website_generators = ["registration"]` in hooks.py under my app.
But I am not getting whether to extend WebsiteGenerator.

page name is reg1.html, reg1.py and hooks entry is like `website_generators = ["reg1"]`

I want to achieve similar structure like contact us page.

You have to put it in templates/pages

no need to add generators


Thanks,

On Wed, Sep 10, 2014 at 10:46 AM, Rushabh Mehta <rm...@gmail.com> wrote:
You have to add it to hooks.py and subclass from WebsiteGenerator




On 09-Sep-2014, at 8:24 pm, Saurabh Palande <sa...@gmail.com> wrote:

Hi Rushabh,

I have created a `registration.html` and `registration.py`. Then I execute `frappe --build_website`.
But this haven't create a page. Also there is no doctype named as 'Website Route'.
Please let me know whether I am missing .

Thanks,

On Tue, Jul 22, 2014 at 6:23 PM, Saurabh Palande <sa...@gmail.com> wrote:
Hi Rushabh,

Thank You.


On Tue, Jul 22, 2014 at 5:36 PM, Rushabh Mehta <rm...@gmail.com> wrote:
Website Route is created automatically. Use `frappe --build_website` after you create your page.


On 22-Jul-2014, at 5:18 pm, saurabh palande <sa...@gmail.com> wrote:

Hi Rushabh,

I want to add a new page similar to Contact Us. I made a go through, I figured out that we have to add Template and Controller in Website Route.

When I tried to create new record in Website Route, it not permits me (logged in as Administrator) . So I have created a web page and then I am trying to change the Template and Controller's path but these two fields are not editable.

Please let me know the correct way for achieveing the same.

Thanks,
Saurabh Palande

–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/c2382d0e-bac0-4522-9d6a-8fc4111b9e70%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.



–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/1071D62D-309C-4896-9CFA-7EA0E8985C20%40gmail.com.

For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande



--
S.S.Palande

–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP-G4f6g%3D2_YPHWeyoRBE2SVemPOs79FgoMzcH4szw%2B1bw%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.



–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/B5DF86DE-FB9C-473D-9FC6-76D5BE272B38%40gmail.com.


    For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande

–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP9Czf%3DDmKBKkM83-PBNwJQTch6P680HSc%3D7aj8OpGRkKA%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.



–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/8ADA7C06-1DC7-4956-91D2-3C1D7D088CA1%40gmail.com.


    For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande

–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP_yLc880hOua%2BaoH5FcNEnuBWxs5qrnt3ShhFEeCzHQ%2Bw%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.


–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/DDA08263-F2E1-4B9F-81BC-749818FD12CF%40gmail.com.


    For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP9VjZ36wFkuqaG4d03d9VkmUWj%3DJ-hnaoKaqbJMW9-T_g%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
11
Hi Rushabh,

I have used `echo "flush_all" | nc 127.0.0.1 11211` command to clear memcache, it works for me, but is it a correct way or frappe have any built in command for this.

Regards,

On Fri, Sep 12, 2014 at 1:48 PM, Saurabh Palande <sa...@gmail.com> wrote:
Hi Rushabh,

Thank You.



On Thu, Sep 11, 2014 at 12:01 PM, Rushabh Mehta <rm...@gmail.com> wrote:


On 11-Sep-2014, at 11:14 am, Saurabh Palande <sa...@gmail.com> wrote:

HI Rushabh,

Those file are already under `fx/fx/templates/pages`.
Should I have to move them under `frappe/frappe/templates/pages` ?

No it should work as it is.

There was a bug with clearing cache in case of new pages. It is fixed in Frappe 5.0

As a temp solution - clear your memcache to make your page appear.


Thanks,

On Thu, Sep 11, 2014 at 10:37 AM, Rushabh Mehta <rm...@gmail.com> wrote:


On 10-Sep-2014, at 6:36 pm, Saurabh Palande <sa...@gmail.com> wrote:

Hi Rushabh,

I have created an App, named ass FX. Under template folder i have added registration.html and registration.py.
Then I have added `website_generators = ["registration"]` in hooks.py under my app.
But I am not getting whether to extend WebsiteGenerator.

page name is reg1.html, reg1.py and hooks entry is like `website_generators = ["reg1"]`

I want to achieve similar structure like contact us page.

You have to put it in templates/pages

no need to add generators


Thanks,

On Wed, Sep 10, 2014 at 10:46 AM, Rushabh Mehta <rm...@gmail.com> wrote:
You have to add it to hooks.py and subclass from WebsiteGenerator




On 09-Sep-2014, at 8:24 pm, Saurabh Palande <sa...@gmail.com> wrote:

Hi Rushabh,

I have created a `registration.html` and `registration.py`. Then I execute `frappe --build_website`.
But this haven't create a page. Also there is no doctype named as 'Website Route'.
Please let me know whether I am missing .

Thanks,

On Tue, Jul 22, 2014 at 6:23 PM, Saurabh Palande <sa...@gmail.com> wrote:
Hi Rushabh,

Thank You.


On Tue, Jul 22, 2014 at 5:36 PM, Rushabh Mehta <rm...@gmail.com> wrote:
Website Route is created automatically. Use `frappe --build_website` after you create your page.


On 22-Jul-2014, at 5:18 pm, saurabh palande <sa...@gmail.com> wrote:

Hi Rushabh,

I want to add a new page similar to Contact Us. I made a go through, I figured out that we have to add Template and Controller in Website Route.

When I tried to create new record in Website Route, it not permits me (logged in as Administrator) . So I have created a web page and then I am trying to change the Template and Controller's path but these two fields are not editable.

Please let me know the correct way for achieveing the same.

Thanks,
Saurabh Palande

–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/c2382d0e-bac0-4522-9d6a-8fc4111b9e70%40googlegroups.com.

For more options, visit https://groups.google.com/d/optout.



–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.

  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.

  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email

  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/1071D62D-309C-4896-9CFA-7EA0E8985C20%40gmail.com.

For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande



--
S.S.Palande

–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP-G4f6g%3D2_YPHWeyoRBE2SVemPOs79FgoMzcH4szw%2B1bw%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.



–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/B5DF86DE-FB9C-473D-9FC6-76D5BE272B38%40gmail.com.


    For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande

–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP9Czf%3DDmKBKkM83-PBNwJQTch6P680HSc%3D7aj8OpGRkKA%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.



–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/8ADA7C06-1DC7-4956-91D2-3C1D7D088CA1%40gmail.com.


    For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande

–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP_yLc880hOua%2BaoH5FcNEnuBWxs5qrnt3ShhFEeCzHQ%2Bw%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.


–

Note:



If you are posting an issue,


  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.



    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/DDA08263-F2E1-4B9F-81BC-749818FD12CF%40gmail.com.


    For more options, visit https://groups.google.com/d/optout.



--
S.S.Palande


--
S.S.Palande

–

Note:

 

If you are posting an issue,

 

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

     

    End of Note

    —

    You received this message because you are subscribed to the Google Groups "ERPNext Developer Forum" group.

    To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un…@googlegroups.com.

    To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP-UbzKfDAACsPPQaJvC2qKhdFNgGLvwRM_NAHDuGdSRrQ%40mail.gmail.com.

    For more options, visit https://groups.google.com/d/optout.
12

bench frappe --flush should do the same

On Fri, Sep 12, 2014 at 3:45 PM, Saurabh Palande sa...@gmail.com wrote:

Hi Rushabh,

I have used echo "flush_all" | nc 127.0.0.1 11211 command to clear
memcache, it works for me, but is it a correct way or frappe have any built
in command for this.

Regards,

On Fri, Sep 12, 2014 at 1:48 PM, Saurabh Palande sa...@gmail.com
wrote:

Hi Rushabh,

Thank You.

On Thu, Sep 11, 2014 at 12:01 PM, Rushabh Mehta rm...@gmail.com wrote:

On 11-Sep-2014, at 11:14 am, Saurabh Palande sa...@gmail.com
wrote:

HI Rushabh,

Those file are already under fx/fx/templates/pages.
Should I have to move them under frappe/frappe/templates/pages ?

No it should work as it is.

There was a bug with clearing cache in case of new pages. It is fixed in
Frappe 5.0

As a temp solution - clear your memcache to make your page appear.

Thanks,

On Thu, Sep 11, 2014 at 10:37 AM, Rushabh Mehta rm...@gmail.com wrote:

On 10-Sep-2014, at 6:36 pm, Saurabh Palande sa...@gmail.com
wrote:

Hi Rushabh,

I have created an App, named ass FX. Under template folder i have added
registration.html and registration.py.
Then I have added website_generators = ["registration"] in hooks.py
under my app.
But I am not getting whether to extend WebsiteGenerator.

App fork is : https://github.com/saurabh6790/fx
page name is reg1.html, reg1.py and hooks entry is like
website_generators = ["reg1"]

I want to achieve similar structure like contact us page.

You have to put it in templates/pages

no need to add generators

Thanks,

On Wed, Sep 10, 2014 at 10:46 AM, Rushabh Mehta rm...@gmail.com
wrote:

You have to add it to hooks.py and subclass from WebsiteGenerator

On 09-Sep-2014, at 8:24 pm, Saurabh Palande sa...@gmail.com
wrote:

Hi Rushabh,

I have created a registration.html and registration.py. Then I
execute frappe --build_website.
But this haven’t create a page. Also there is no doctype named as
‘Website Route’.
Please let me know whether I am missing .

Thanks,

On Tue, Jul 22, 2014 at 6:23 PM, Saurabh Palande
sa...@gmail.com wrote:

Hi Rushabh,

Thank You.

On Tue, Jul 22, 2014 at 5:36 PM, Rushabh Mehta rm...@gmail.com
wrote:

Website Route is created automatically. Use frappe --build_website
after you create your page.

On 22-Jul-2014, at 5:18 pm, saurabh palande sa...@gmail.com
wrote:

Hi Rushabh,

I want to add a new page similar to Contact Us. I made a go through,
I figured out that we have to add Template and Controller in Website Route.

When I tried to create new record in Website Route, it not permits me
(logged in as Administrator) . So I have created a web page and then I am
trying to change the Template and Controller’s path but these two fields are
not editable.

Please let me know the correct way for achieveing the same.

Thanks,
Saurabh Palande

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this forum by a team (https://frappe.io/webnotes). So please consider
    donating if you find this forum useful (https://frappe.io/buy). Even a small
    amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much information as you can. Please see it from the point of view of the
    person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com
    and send only the URL via email
  4. For sending images, use http://imgur.com or other similar
    services. Do not send images as attachments. Links are good. Same goes for
    any file you are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/c2382d0e-bac0-4522-9d6a-8fc4111b9e70%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this forum by a team (https://frappe.io/webnotes). So please consider
    donating if you find this forum useful (https://frappe.io/buy). Even a small
    amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much information as you can. Please see it from the point of view of the
    person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com
    and send only the URL via email
  4. For sending images, use http://imgur.com or other similar
    services. Do not send images as attachments. Links are good. Same goes for
    any file you are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/1071D62D-309C-4896-9CFA-7EA0E8985C20%40gmail.com.

For more options, visit https://groups.google.com/d/optout.

–
S.S.Palande

–
S.S.Palande

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this forum by a team (https://frappe.io/webnotes). So please consider
    donating if you find this forum useful (https://frappe.io/buy). Even a small
    amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much information as you can. Please see it from the point of view of the
    person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services.
    Do not send images as attachments. Links are good. Same goes for any file
    you are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP-G4f6g%3D2_YPHWeyoRBE2SVemPOs79FgoMzcH4szw%2B1bw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this forum by a team (https://frappe.io/webnotes). So please consider
    donating if you find this forum useful (https://frappe.io/buy). Even a small
    amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much information as you can. Please see it from the point of view of the
    person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services.
    Do not send images as attachments. Links are good. Same goes for any file
    you are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/B5DF86DE-FB9C-473D-9FC6-76D5BE272B38%40gmail.com.

For more options, visit https://groups.google.com/d/optout.

–
S.S.Palande

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this forum by a team (https://frappe.io/webnotes). So please consider
    donating if you find this forum useful (https://frappe.io/buy). Even a small
    amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much information as you can. Please see it from the point of view of the
    person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services.
    Do not send images as attachments. Links are good. Same goes for any file
    you are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP9Czf%3DDmKBKkM83-PBNwJQTch6P680HSc%3D7aj8OpGRkKA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this forum by a team (https://frappe.io/webnotes). So please consider
    donating if you find this forum useful (https://frappe.io/buy). Even a small
    amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much information as you can. Please see it from the point of view of the
    person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services.
    Do not send images as attachments. Links are good. Same goes for any file
    you are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/8ADA7C06-1DC7-4956-91D2-3C1D7D088CA1%40gmail.com.

For more options, visit https://groups.google.com/d/optout.

–
S.S.Palande

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this forum by a team (https://frappe.io/webnotes). So please consider
    donating if you find this forum useful (https://frappe.io/buy). Even a small
    amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much information as you can. Please see it from the point of view of the
    person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP_yLc880hOua%2BaoH5FcNEnuBWxs5qrnt3ShhFEeCzHQ%2Bw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this forum by a team (https://frappe.io/webnotes). So please consider
    donating if you find this forum useful (https://frappe.io/buy). Even a small
    amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much information as you can. Please see it from the point of view of the
    person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/DDA08263-F2E1-4B9F-81BC-749818FD12CF%40gmail.com.

For more options, visit https://groups.google.com/d/optout.

–
S.S.Palande

–
S.S.Palande

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this
    forum by a team (https://frappe.io/webnotes). So please consider donating if
    you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send
    only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP-UbzKfDAACsPPQaJvC2qKhdFNgGLvwRM_NAHDuGdSRrQ%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

–
Pratik
erpnext

13

Sorry, it’s
bench frappe --flush_memcache

On Fri, Sep 12, 2014 at 9:20 PM, Pratik Vyas pd...@gmail.com wrote:

bench frappe --flush should do the same

On Fri, Sep 12, 2014 at 3:45 PM, Saurabh Palande sa...@gmail.com wrote:

Hi Rushabh,

I have used echo "flush_all" | nc 127.0.0.1 11211 command to clear
memcache, it works for me, but is it a correct way or frappe have any built
in command for this.

Regards,

On Fri, Sep 12, 2014 at 1:48 PM, Saurabh Palande sa...@gmail.com
wrote:

Hi Rushabh,

Thank You.

On Thu, Sep 11, 2014 at 12:01 PM, Rushabh Mehta rm...@gmail.com wrote:

On 11-Sep-2014, at 11:14 am, Saurabh Palande sa...@gmail.com
wrote:

HI Rushabh,

Those file are already under fx/fx/templates/pages.
Should I have to move them under frappe/frappe/templates/pages ?

No it should work as it is.

There was a bug with clearing cache in case of new pages. It is fixed in
Frappe 5.0

As a temp solution - clear your memcache to make your page appear.

Thanks,

On Thu, Sep 11, 2014 at 10:37 AM, Rushabh Mehta rm...@gmail.com wrote:

On 10-Sep-2014, at 6:36 pm, Saurabh Palande sa...@gmail.com
wrote:

Hi Rushabh,

I have created an App, named ass FX. Under template folder i have added
registration.html and registration.py.
Then I have added website_generators = ["registration"] in hooks.py
under my app.
But I am not getting whether to extend WebsiteGenerator.

App fork is : https://github.com/saurabh6790/fx
page name is reg1.html, reg1.py and hooks entry is like
website_generators = ["reg1"]

I want to achieve similar structure like contact us page.

You have to put it in templates/pages

no need to add generators

Thanks,

On Wed, Sep 10, 2014 at 10:46 AM, Rushabh Mehta rm...@gmail.com
wrote:

You have to add it to hooks.py and subclass from WebsiteGenerator

On 09-Sep-2014, at 8:24 pm, Saurabh Palande sa...@gmail.com
wrote:

Hi Rushabh,

I have created a registration.html and registration.py. Then I
execute frappe --build_website.
But this haven’t create a page. Also there is no doctype named as
‘Website Route’.
Please let me know whether I am missing .

Thanks,

On Tue, Jul 22, 2014 at 6:23 PM, Saurabh Palande
sa...@gmail.com wrote:

Hi Rushabh,

Thank You.

On Tue, Jul 22, 2014 at 5:36 PM, Rushabh Mehta rm...@gmail.com
wrote:

Website Route is created automatically. Use frappe --build_website
after you create your page.

On 22-Jul-2014, at 5:18 pm, saurabh palande sa...@gmail.com
wrote:

Hi Rushabh,

I want to add a new page similar to Contact Us. I made a go through,
I figured out that we have to add Template and Controller in Website Route.

When I tried to create new record in Website Route, it not permits me
(logged in as Administrator) . So I have created a web page and then I am
trying to change the Template and Controller’s path but these two fields are
not editable.

Please let me know the correct way for achieveing the same.

Thanks,
Saurabh Palande

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this forum by a team (https://frappe.io/webnotes). So please consider
    donating if you find this forum useful (https://frappe.io/buy). Even a small
    amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much information as you can. Please see it from the point of view of the
    person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com
    and send only the URL via email
  4. For sending images, use http://imgur.com or other similar
    services. Do not send images as attachments. Links are good. Same goes for
    any file you are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/c2382d0e-bac0-4522-9d6a-8fc4111b9e70%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this forum by a team (https://frappe.io/webnotes). So please consider
    donating if you find this forum useful (https://frappe.io/buy). Even a small
    amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much information as you can. Please see it from the point of view of the
    person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com
    and send only the URL via email
  4. For sending images, use http://imgur.com or other similar
    services. Do not send images as attachments. Links are good. Same goes for
    any file you are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it,
send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/1071D62D-309C-4896-9CFA-7EA0E8985C20%40gmail.com.

For more options, visit https://groups.google.com/d/optout.

–
S.S.Palande

–
S.S.Palande

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this forum by a team (https://frappe.io/webnotes). So please consider
    donating if you find this forum useful (https://frappe.io/buy). Even a small
    amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much information as you can. Please see it from the point of view of the
    person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services.
    Do not send images as attachments. Links are good. Same goes for any file
    you are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP-G4f6g%3D2_YPHWeyoRBE2SVemPOs79FgoMzcH4szw%2B1bw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this forum by a team (https://frappe.io/webnotes). So please consider
    donating if you find this forum useful (https://frappe.io/buy). Even a small
    amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much information as you can. Please see it from the point of view of the
    person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services.
    Do not send images as attachments. Links are good. Same goes for any file
    you are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/B5DF86DE-FB9C-473D-9FC6-76D5BE272B38%40gmail.com.

For more options, visit https://groups.google.com/d/optout.

–
S.S.Palande

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this forum by a team (https://frappe.io/webnotes). So please consider
    donating if you find this forum useful (https://frappe.io/buy). Even a small
    amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much information as you can. Please see it from the point of view of the
    person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services.
    Do not send images as attachments. Links are good. Same goes for any file
    you are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP9Czf%3DDmKBKkM83-PBNwJQTch6P680HSc%3D7aj8OpGRkKA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this forum by a team (https://frappe.io/webnotes). So please consider
    donating if you find this forum useful (https://frappe.io/buy). Even a small
    amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much information as you can. Please see it from the point of view of the
    person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services.
    Do not send images as attachments. Links are good. Same goes for any file
    you are going to send.

End of Note

You received this message because you are subscribed to the Google
Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send
an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/8ADA7C06-1DC7-4956-91D2-3C1D7D088CA1%40gmail.com.

For more options, visit https://groups.google.com/d/optout.

–
S.S.Palande

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this forum by a team (https://frappe.io/webnotes). So please consider
    donating if you find this forum useful (https://frappe.io/buy). Even a small
    amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much information as you can. Please see it from the point of view of the
    person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP_yLc880hOua%2BaoH5FcNEnuBWxs5qrnt3ShhFEeCzHQ%2Bw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on
    this forum by a team (https://frappe.io/webnotes). So please consider
    donating if you find this forum useful (https://frappe.io/buy). Even a small
    amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as
    much information as you can. Please see it from the point of view of the
    person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/DDA08263-F2E1-4B9F-81BC-749818FD12CF%40gmail.com.

For more options, visit https://groups.google.com/d/optout.

–
S.S.Palande

–
S.S.Palande

–
Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this
    forum by a team (https://frappe.io/webnotes). So please consider donating if
    you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send
    only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAGCrPP-UbzKfDAACsPPQaJvC2qKhdFNgGLvwRM_NAHDuGdSRrQ%40mail.gmail.com.

For more options, visit https://groups.google.com/d/optout.

–
Pratik
erpnext

–
Pratik
erpnext