Check your mysql settings. there are some optimisations that you can do to improve performance there
Can you recommend something ?
Can you share/show your /etc/mysql/my.cnf
[client]
port = 3306
socket = /var/run/mysqld/mysqld.sock
# Here is entries for some specific programs
# The following values assume you have at least 32M ram
# This was formally known as [safe_mysqld]. Both versions are currently parsed.
[mysqld_safe]
socket = /var/run/mysqld/mysqld.sock
nice = 0
[mysqld]
#
# * Basic Settings
#
user = mysql
pid-file = /var/run/mysqld/mysqld.pid
socket = /var/run/mysqld/mysqld.sock
port = 3306
basedir = /usr
datadir = /var/lib/mysql
tmpdir = /tmp
lc_messages_dir = /usr/share/mysql
lc_messages = en_US
skip-external-locking
#
# Instead of skip-networking the default is now to listen only on
# localhost which is more compatible and is not less secure.
bind-address = 127.0.0.1
#
# * Fine Tuning
#
max_connections = 100
connect_timeout = 5
wait_timeout = 600
max_allowed_packet = 16M
thread_cache_size = 128
sort_buffer_size = 4M
bulk_insert_buffer_size = 16M
tmp_table_size = 32M
max_heap_table_size = 32M
#
# * MyISAM
#
# This replaces the startup script and checks MyISAM tables if needed
# the first time they are touched. On error, make copy and try a repair.
myisam_recover_options = BACKUP
key_buffer_size = 128M
#open-files-limit = 2000
table_open_cache = 400
myisam_sort_buffer_size = 512M
concurrent_insert = 2
read_buffer_size = 2M
read_rnd_buffer_size = 1M
#
# * Query Cache Configuration
#
# Cache only tiny result sets, so we can fit more in the query cache.
query_cache_limit = 128K
query_cache_size = 64M
# for more write intensive setups, set to DEMAND or OFF
#query_cache_type = DEMAND
#
# * Logging and Replication
#
# Both location gets rotated by the cronjob.
# Be aware that this log type is a performance killer.
# As of 5.1 you can enable the log at runtime!
#general_log_file = /var/log/mysql/mysql.log
#general_log = 1
#
# Error logging goes to syslog due to /etc/mysql/conf.d/mysqld_safe_syslog.cnf.
#
# we do want to know about network errors and such
log_warnings = 2
#
# Enable the slow query log to see queries with especially long duration
#slow_query_log[={0|1}]
slow_query_log_file = /var/log/mysql/mariadb-slow.log
long_query_time = 10
#log_slow_rate_limit = 1000
log_slow_verbosity = query_plan
#log-queries-not-using-indexes
#log_slow_admin_statements
#
# The following can be used as easy to replay backup logs or for replication.
# note: if you are setting up a replication slave, see README.Debian about
# other settings you may need to change.
#server-id = 1
#report_host = master1
#auto_increment_increment = 2
#auto_increment_offset = 1
log_bin = /var/log/mysql/mariadb-bin
log_bin_index = /var/log/mysql/mariadb-bin.index
# not fab for performance, but safer
#sync_binlog = 1
expire_logs_days = 10
max_binlog_size = 100M
# slaves
#relay_log = /var/log/mysql/relay-bin
#relay_log_index = /var/log/mysql/relay-bin.index
#relay_log_info_file = /var/log/mysql/relay-bin.info
#log_slave_updates
#read_only
#
# If applications support it, this stricter sql_mode prevents some
# mistakes like inserting invalid dates etc.
#sql_mode = NO_ENGINE_SUBSTITUTION,TRADITIONAL
#
# * InnoDB
#
# InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/.
# Read the manual for more InnoDB related options. There are many!
default_storage_engine = InnoDB
# you can't just change log file size, requires special procedure
#innodb_log_file_size = 50M
innodb_buffer_pool_size = 256M
innodb_log_buffer_size = 8M
innodb_file_per_table = 1
innodb_open_files = 400
innodb_io_capacity = 400
innodb_flush_method = O_DIRECT
#
# * Security Features
#
# Read the manual, too, if you want chroot!
# chroot = /var/lib/mysql/
#
# For generating SSL certificates I recommend the OpenSSL GUI "tinyca".
#
# ssl-ca=/etc/mysql/cacert.pem
# ssl-cert=/etc/mysql/server-cert.pem
# ssl-key=/etc/mysql/server-key.pem
#
# * Galera-related settings
#
[galera]
# Mandatory settings
#wsrep_on=ON
#wsrep_provider=
#wsrep_cluster_address=
#binlog_format=row
#default_storage_engine=InnoDB
#innodb_autoinc_lock_mode=2
#
# Allow server to accept connections on all interfaces.
#
#bind-address=0.0.0.0
#
# Optional setting
#wsrep_slave_threads=1
#innodb_flush_log_at_trx_commit=0
[mysqldump]
quick
quote-names
max_allowed_packet = 16M
[mysql]
#no-auto-rehash # faster start of mysql but no tab completion
[isamchk]
key_buffer = 16M
#
# * IMPORTANT: Additional settings that can override those from this file!
# The files must end with '.cnf', otherwise they'll be ignored.
#
!includedir /etc/mysql/conf.d/
EDIT by @rahy : sorry to edit your post, but I help to make it more readable.
1 Like
You have this…
#innodb_log_file_size = 50M
innodb_buffer_pool_size = 256M
innodb_log_buffer_size = 8M
innodb_file_per_table = 1
innodb_open_files = 400
innodb_io_capacity = 400
To determine approximately decent values, run these commands in a terminal (with sudo privileges)
#The figures should be adjusted to suit YOUR system - which is guesstimated and implemented here...
physRAM=$(vmstat -s --unit M | awk '/total memory/ { print int( ($1)/1000 + 0.5) * 1024 } '); #printf "RAM:$physRAM\n";#4DBG#
innodbBufferPoolSize=$(($physRAM/2)); innodbBufferPoolSizeM=$(echo "$innodbBufferPoolSize""M");
innodbLogFileSize=$(($innodbBufferPoolSize/4)); innodbLogFileSizeM=$(echo "$innodbLogFileSize""M");
innodbLogBufferSize=$(($innodbLogFileSize/2)); innodbLogBufferSizeM=$(echo "$innodbLogBufferSize""M");
printf "$innodbBufferPoolSizeM\t$innodbLogFileSizeM\t$innodbLogBufferSizeM\n";#4DBG#
Then in the mysql config files, set them something like this
innodb_buffer_pool_size=$innodbBufferPoolSizeM
# Set the log file size to about 25% of the buffer pool size
innodb_log_file_size=$innodbLogFileSizeM
innodb_log_buffer_size=$innodbLogBufferSizeM
# the default here is 4MB, or maybe ??16MB?? in more recent versions, which sometimes allows for disconnects in the middle of transactions
max_allowed_packet=32M
Restart mysql and ERPNext
1 Like
I have set the values as the RAM is 2GB at the moment.
innodb_log_file_size = 256M
innodb_buffer_pool_size = 1028M
innodb_log_buffer_size = 128M
> service mysql restart
> bench restart
No change observerd as of yet.
2GB is quite low for the newer versions of ERPNext - 4 is recommended
I have tested for 4GB as well, no change, with following settings:
innodb_log_file_size = 1028M
innodb_buffer_pool_size = 2056M
innodb_log_buffer_size = 512M
max_allowed_packet=32M
You need to check if your system is swapping to disk - this causes major performance issues (linked to insufficient RAM) - what does this show
free -mh
#or
free -mh | awk ‘/Swap/ {print $3}’;
Mem: 3.9G 1.2G 1.6G 14M 1.1G 2.4G
Swap: 1.0G 0B 1.0G
Are you basing your judgement of speed on other ERPNext experiences or is this a first impression?
Are there any ERPNext operations that seem especially slow?
If possible, a screenshot of the top or htop command may be useful
Are there a large number of Items in stock?
The frappe process is using 100% cpu in that shot, was the Stock balance loading when it was taken?
There are 2800 items in stock. I don’t think its a huge number to tackle with 4GB ram and CPU with 2 cores.
I assume, mysql database needs to be optimize for this number of items? any suggestion on how to do it ?
See if anything here can be helpful: https://mariadb.com/kb/en/optimization-and-tuning/ , though @trentmu may have covered some of that.
There is also mtop/mytop that may be useful.
Not sure it is a DBMS problem. What is the version of ERPNext?
The mysqld is using most of your RAM, which indicates a problem on dirty cache buffers
1 Like
Any tip for the solution ?
Hi @avaiskhatri
Have you installed erpnext using the easy install or the manual install ??
I have been using the develop version of erpnext on DigitalOcean for over a year now, with 2GB.
I had used the combination of the article below and manual install to install erpnext.
Have a look at the section for mysql.
though I have to say I have around 12000 products but no stock balance as we mostly do dropship…so your mileage may vary.
this is the htop at the moment