Bench start error

Hi,

After installing frappe and setting up ERPNEXT on UBUNTU, when I run
bench start, I get the error: Procfile does not exists or is not a
file

Regards
Manish


Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDfvYZMfbrrCei9oKGYLsKpBT%3DzsWkk%2B2kMwij8hRJWzyvA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

On Wed, Jul 30, 2014 at 1:44 PM, Manish Shah sh...@gmail.com wrote:

Hi,

After installing frappe and setting up ERPNEXT on UBUNTU, when I run
bench start, I get the error: Procfile does not exists or is not a
file

That is stange. Anyways, you can generate the procfile using the
command bench setup procfile

Regards
Manish


Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDfvYZMfbrrCei9oKGYLsKpBT%3DzsWkk%2B2kMwij8hRJWzyvA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Pratik
erpnext

1 Like

The command worked out

Thanks Pratik,

Regards
Manish

On 7/30/14, Pratik Vyas pd...@gmail.com wrote:

On Wed, Jul 30, 2014 at 1:44 PM, Manish Shah sh...@gmail.com wrote:

Hi,

After installing frappe and setting up ERPNEXT on UBUNTU, when I run
bench start, I get the error: Procfile does not exists or is not a
file

That is stange. Anyways, you can generate the procfile using the
command bench setup procfile

Regards
Manish


Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this
    forum by a team (https://frappe.io/webnotes). So please consider donating
    if you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and
    send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDfvYZMfbrrCei9oKGYLsKpBT%3DzsWkk%2B2kMwij8hRJWzyvA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Pratik
erpnext


Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this
    forum by a team (https://frappe.io/webnotes). So please consider donating if
    you find this forum useful (https://frappe.io/buy). Even a small amount
    would be helpful.
  2. We should be able to replicate it at our end. So please give us as much
    information as you can. Please see it from the point of view of the person
    receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send
    only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do
    not send images as attachments. Links are good. Same goes for any file you
    are going to send.

End of Note

You received this message because you are subscribed to the Google Groups
“ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an
email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit
https://groups.google.com/d/msgid/erpnext-developer-forum/CAG8U0En7XbwfsX4pVmfkj7D2ghxHNRPBrYLeudetW527xoWX9g%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.


Note:

If you are posting an issue,

  1. ERPNext is a free and open source software and support is given on this forum by a team (https://frappe.io/webnotes). So please consider donating if you find this forum useful (https://frappe.io/buy). Even a small amount would be helpful.
  2. We should be able to replicate it at our end. So please give us as much information as you can. Please see it from the point of view of the person receiving the communication.
  3. Paste your code at http://pastebin.com or http://gist.github.com and send only the URL via email
  4. For sending images, use http://imgur.com or other similar services. Do not send images as attachments. Links are good. Same goes for any file you are going to send.

End of Note

You received this message because you are subscribed to the Google Groups “ERPNext Developer Forum” group.
To unsubscribe from this group and stop receiving emails from it, send an email to erpnext-developer-forum+un...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/erpnext-developer-forum/CAJgXDfs%2BqEoBpqO7WVEJgq%3DgTsosAK2eRimtGPMjLicd5SJ3yQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Thanks it’s work with me.